User Instructions

www.pulsar.pl INTE
9
5. PSU configuration.
5.1 Configuration of power supplies of PSBEN series with LCD display.
The PSU is fitted with LCD display, which enables setting the communication parameters of the serial port
from the LCD panel. To enter the setup mode, press the „SET” button from the main screen.
- use the „>” or „<” buttons to display the PSU menu
- press the „SET” button
- use the „>” or „<” buttons to display the Transmission menu
(The Transmission menu is at the bottom of the screen)
- press the „SET” button, the prompt will appear at the end of the line
- use the „>” or „<” buttons to set the 115.2k 8E1
(if the PSU does not support this speed, choose other
maximum speed available)
- confirm by pressing the "SET" button