User Instructions

www.pulsar.pl INTR
11
4.4 Configuration of power supplies of EN54 series with LED display
The PSU fitted with LED display enables setting the communication parameters of the serial port
from the LED panel. To enter the setup mode, simultaneously press the „<,>” rightmost and leftmost
buttons.
4.4.1 Setting the communication address
- simultaneously press the „<,>” rightmost and leftmost buttons
- The „tst” parameter will be displayed
- use the „<” or „>” buttons to display the „Adr” parameter
- press „OK”
- The current address of the PSU will be displayed
- use the „<” or „>” buttons in order to set the address
1÷ 247 – address of the PSU during the communication with the computer
- confirm by pressing „OK”
- in order to return to the main menu, simultaneously press the „<,>” rightmost and leftmost
buttons