User Instructions

www.pulsar.pl INTRE
11
5. Configuration of power supplies.
5.1 Configuration of power supplies of the PSBEN series with LCD display
The PSU fitted with LCD display enables setting the communication parameters of the serial port from the
LCD panel. To enter the setup mode, press the „SET” button from the main screen.
- use the „>” or „<” buttons to display the PSU menu
- press the „SET” button
- use the „<” or „>” buttons to display the Transmission menu
(The Transmission menu is at the bottom of the screen)
- press the „SET” button, the prompt will appear at the end of the line
- use the „>” or „<” buttons to set the 115.2k 8E1
(if the PSU does not support this speed, choose other maximum
speed available)
- confirm by pressing the „SET” button