MECHANICAL WATCHES MECHANICAL_E 1 09.6.
■ HOW TO START THE MECHANICAL WATCH MECHANICAL WATCHES HOW TO USE THE WATCH Unlocking the crown 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. Locking the crown 1 Push Crown back in to normal position. 2 Turn Crown clockwise while pressing it lightly until tight. 2 * When using the watch in water: Before using the watch in water, be sure the crown is screwed in completely. Do not operate the crown when the watch is wet or in water.
2 Turn to show the previous day’s date. 3 Pull out to the second click. 4 Turn until the desired date appears. * Turn Crown to advance Hour and Minute hands. * Turn Crown to advance Hour and Minute hands. 6 Turn to set the time. 7 Push back in to normal position. 10 Notes on time setting: • When setting the hands, first set them to a time a few minutes earlier than the correct time, and then advance them to the exact time.
TO PRESERVE THE QUALITY OF YOUR WATCH ● Water resistance (5 bar)* 6 MECHANICAL_E 6-7 NOTE: Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water.
CARE OF CASE AND BRACELET To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth. English S CHEMICALS Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged. 8-9 It is recommended that the watch be checked once every 2 to 3 years.
