Data Sheet

Lock for casings: MR008 / MR027 VII
- two keys included
- compatible with casings for SSWiN
- MR008: various code lock, type 802
- MR027: repeatable code lock 9081, type 876
- c
-surface mounted:
AWO804Z / 805Z / 806Z
ompatible with (the following) telecommunication
enclosures
Key: MR009 (raw material)/ MR042 (key to lock )
- compatible with locks MR008/MR027
9081
Tamper (antisabotage switch): ML101
- contacts C/NO (C/NC closed casings)
- switched current 0,5A@30VDC /50VAC max.
- compatible with casings for SSWiN (grip PW050 required)
Built-up tamper 16mm: PKAZ005
- contacts C/NO (C/NC closed casings)
- switched current 0,5A@30VDC /50VAC max.
- compatible with casings for SSWiN
- set contains cables and mounting screws
Tamper grip: PW050
- destined for assembling ML101 in casing
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
Additional equipment
Pulsar
®
Tamper (antisabotage switch): ML106
- contacts C/NO (C/NC closed casings)
- switched current 1A@30VDC, 3A@250VAC max
Lock for telecommunication enclosures: MR045
ompatible with (the following) telecommunication enclosures
-
- c
AWO801Z / 802Z / 803Z
- B254
two keys included
-flush-mounted:
repeatable code lock, type
23 mm
18 mm
10 mm
15 mm
19 mm