PULSAR ANALOGUE QUARTZ WATCH WITH WORLD TIME, ALARM AND CHRONOGRAPH Cal. N94J FEATURES 2 This is a multi-functional watch featuring the world time, alarm and chronograph. The mode changes simply by turning the crown. ■ TIME Hour and minute hands with an AM/PM indicator. ■ CALENDAR Date is indicated by date indicator. ■ WORLD TIME Time of 24 different time zones is displayed in 12-hour indication with a small hand indicating AM/PM. ■ ALARM The alarm can be set to ring on a 24-hour basis.
MODES AND DISPLAYS There are two buttons and a crown as indicated in the illustration below.
The mode changes by turning the crown at normal position clockwise or counterclockwise, and the mode hand indicates the selected mode. The hands move and perform different functions in each mode. MODE HAND TIME Time of your local area Date of your local area Time zone indication by pressing “A” or “B” Alarm disengaged 4 TIME SET Time of your local area Alarm set time Date of your local area Time zone indication by pressing “A” or “B” Alarm engaged W.T.
In each mode the hands perform the following functions. Hand Center hand Hour hand Minute hand AM/PM indicator Press button çAé or çBé Mode Chronograph 1/10 sec.
Functions of the crown and buttons in each mode Crown position Normal First click Buttons Second click Buttons Buttons Crown Mode çA é TIME TIME Mode change Mode change çBé * Time zone of current time * Time zone of current time çA é çBé çA é çBé Calendar setting Time setting Calendar setting Time setting ** Alarm test SET → ÿ ← Mode change CHRONO Mode change W.T. N/F : *: 6 ** : Mode change Mode change N/F N/F Alarm setting N/F Adjusting chronograph 1/10 sec.
ADJUSTING THE HAND POSITION Before setting the time or calendar, or after the battery is replaced, be sure to adjust the hand position using “→Ø←” mode. • Turn the crown to set the mode hand to “→Ø←”. If all the hands do not return to the 12 o’clock position, follow the procedure below.
1. Pull out the crown to the first click. 2. Press “A” or “B” repeatedly but separately to reset the center and chronograph 1/10 second hands, which are mechanically engaged. Both the hands move simultaneously and return to the 12 o’clock position at the same time. * The hands move quickly if the button is kept pressed. 3 . Pull out the crown to the second click. Press “A” or “B” repeatedly but separately to reset the hour and minute hands and AM/PM indicator, which are mechanically e nga g e d .
First, select the time zone including your local area in the WORLD TIME mode, and then, set the current time/calendar of your area in the TIME mode. 1. Selection of a time zone representing your local area • Turn the crown to set the mode hand to “W.T.” The hands move and stop. * The chronograph 1/10 second hand shows demonstration movement. [“W.T.
1 . Pull out the crown to the second click. The hands move and stop. * The chronograph 1/10 second hand shows demonstration movement. 2. Press “A” or “B” repeatedly but separately to set the center hand to the city on the bezel/dial representing your time zone. * By pressing “A” or “B”, the center hand moves clockwise or counterclockwise, respectively. * The center hand moves quickly if the respective button is kept pressed.
[Example] If you are in London, set the center hand to “G.M.T./LONDON (LON)”. [“W.T.” mode] “G.M.T./LONDON (LON)” Center hand (Time zone indicator) A Crown (Second click) Mode hand B * If the daylight saving time (summer time) is used in your area, refer to “How to show the daylight saving time (summer time)”. 3. Push the crown back in to the normal position. The hands move and stop. * The chronograph 1/10 second hand shows demonstration movement.
2. Time setting • Turn the crown to set the mode hand to either “TIME” or “TIME ”. The hands move and stop. * The chronograph 1/10 second hand shows demonstration movement.
1. Pull out the crown to the second click. 2. Press “A” or “B” repeatedly but separately to set the hour and minute hands and AM/PM indicator to the current time of your local area. * With each press of “A” or “B”, the minute hand advances or moves back one minute, respectively. * The hour and minute hands and AM/PM indicator move correspondingly with one another. * The hands move quickly if the respective button is kept pressed. * When settig the hour hand, check that the AM/PM indicator is correctly set.
7:15AM 7:15PM (19:15) [AM/PM indicator] Midnight AM PM Noon 3 . Push the crown back in to the normal position. * If you wish to set the calendar immediately after setting the time, skip the step “3” here and go to step “1” of the next section “3. Calendar setting”.
3. Calendar setting * Please note that it is necessary to adjust the calendar at the end of 30-day months and February following the procedure below. • Turn the crown to set the mode hand to either “TIME” or “TIME ”.
1. Pull out the crown to the first click. * If you set the calendar immediately after setting the time, you can set the crown to the first click directly from the second click. 2. Press “A” or “B” repeatedly but separately to set the center hand to the current date of your local area. * With each press of “A” or “B”, the center hand advances or moves back one day, respectively. * The center hand moves quickly if the respective button is kept pressed.
WORLD TIME MODE The time of 24 different time zones is displayed in 12-hour indication with a small hand indicating AM/PM. How to show the world time [“W.T.” mode: Time of London] City name Hour hand Center hand (Time zone indicator) A AM/PM indicator Minute hand Crown B Mode hand * Make sure that the current time of your local area is set for the TIME mode. If not, follow the procedure in “HOW TO SET THE TIME, CALENDAR AND WORLD TIME”.
1 . Turn the crown to set the mode hand to “W.T.”. The center hand moves to indicate the city selected previously. The hour and minute hands and AM/PM indicator move to indicate the time of that city. 2. Press “A” or “B” repeatedly but separately to set the center hand to the desired city. * By pressing “A” or “B”, the center hand moves clockwise or counterclockwise, respectively. * The center hand moves quickly if the respective button is kept pressed.
Note: The time differences and use of daylight saving time (summer time) may change in some areas or countries when they are so decided by the countries concerned. • To show the daylight saving time in the WORLD TIME mode: 1. Turn the crown to set the mode hand to “W.T.”. The center hand moves to indicate the city selected previously. The hour and minute hands and AM/PM indicator move to indicate the time of that city. 2. Press “A” or “B” repeatedly but separately to set the center hand to the desired city.
[Example] If you wish to know the time of London, where the daylight saving time is used, set the center hand to “ROME/PARIS(ROM/PAR)” instead of “LONDON (LON)”. “ROME/PARIS (ROM/PAR)” [“W.T.” mode] (Daylight Saving Time for “G.M.T.
• To show the daylight saving time for your local area in the TIME mode: Note: If the time is advanced one hour in the TIME mode to show the daylight saving time, the 24 times in the WORLD TIME mode will all be advanced. To show the daylight saving time in the TIME mode, therefore, be sure to follow the procedure below. 1. Turn the crown to set the mode hand to “W.T.”. The center hand moves to indicate the city selected previously.
5. Turn the crown to set the mode hand to “TIME”. The hour and minute hands and AM/PM indicator indicate the daylight saving time for your local area. [Example] If you are in London and the daylight saving time is used there, set the center hand to “ROME/PARIS (ROM/PAR)”. [“W.T.” mode] “ ROM E / P A RIS( ROM / P A R)” “G.M.T.
A convenient way of using the WORLD TIME mode The times you have set in the WORLD TIME mode can be transferred to the TIME mode one by one. This function is very useful when you travel to different time zone. The time and date of the city you visit can be shown on the watch without resetting the hands. N o t e : If a time is transferred from the WORLD TIME to TIME mode, the time previously set for the TIME mode will be replaced automatically. 1. Turn the crown to set the mode hand to “W.T.”.
* By pressing “A” or “B”, the center hand moves clockwise or counterclockwise, respectively. * The center hand moves quickly if the respective button is kept pressed. * With each press of respective button, the chronograph 1/10 second hand shows demonstration movement. 4 . Push the crown back in to the normal position. The time of the selected city is transferred from the WORLD TIME to the TIME mode. The center hand moves to indicate the city selected previously in “W.T.” mode.
ALARM The alarm can be set on a 24-hour basis in one-minute increments. N o t e : The alarm rings on the basis of the time displayed in the TIME mode. Alarm setting • Turn the crown to set the mode hand to “ SET”. The hour and minute hands and AM/PM indicator move to indicate the alarm time set previously. Minute hand A Crown (Second click) AM/PM indicator Hour hand B The alarm is set to ring at 7:00 AM.
1. Pull out the crown to the second click. 2 . Press “A” or “B” repeatedly but separately to set the hour and minute hands and AM/PM indicator. * All of the three hands are mechanically engaged and can be set at the same time. * The hands move quickly if the button is kept pressed. * Please make sure that AM/PM of the alarm time is correctly set. 3 . Push the crown back in to the normal position.
CHRONOGRAPH The chronograph measures in 1/10 seconds, seconds, minutes and hour up to 12 hours. Chronograph operation • Turn the crown to set the mode hand to “CHRONO”. The hour, minute, center and chronograph 1/10 second hands return to the 12 o’clock (“0”) position. The AM/PM indicator returns to the 24 o’clock or 12 o’clock position. Ex.) Elapsed time measured is 1 hour, 24 minutes and 37.
A 1. Standard measurement To start : To stop : To reset to “0” : B 2. Accumulated elapsed time measurement To start : Press “A”. To stop : Press “A”. To restart : Press “A”. To stop : Press “A”. To reset to “0” : Press “B”. 3. To To To To To 28 Press “A”. Press “A”. Press “B”. Split time measurement start : Press measure split time : Press release split time : Press stop : Press reset to “0” : Press “A”. “B”. “B”. “A”. “B”.
4. Measurement of two competitors To start : Press “A”. To measure the finish time of the first competitor : Press “B”. When the second competitor finishes: Press “A”. To display the finish time of the second competitor : Press “B”. To reset to “0” : Press “B”.
Ex.) Normal movement Swing motion 30 Stop at the 12 o’clock position * STOP / RESET Chronograph minute and hour hands and AM/PM indicator ←→ 10 min. * SPLIT / SPLIT RELEASE Center hand Chronograph ( second hand ) START Chronograph 1/10 second hand ←→ 10 min. 10 min.
Notes: • Even if the mode is changed from “CHRONO” to another while the chronograph is running, it continues measurement. However, if “→Ø←” mode is selected and the crown is pulled out, the measurement is canceled and the hands return to “0” position. If the mode is changed while split time is displayed, the chronograph continues measuring but the split time is released.
NECESSARY OPERATION AFTER BATTERY CHANGE When the battery is replaced, the time information stored in the built-in IC and the time indicated by the hands do not correspond with each other. Before using the watch, therefore, be sure to adjust the hand position, following the procedure in “ADJUSTING THE HAND POSITION”. RESETTING THE BUILT-IN IC In case any of the hands should move improperly, follow the procedure below to adjust the hand movement. 1 . Turn the crown to set the mode indicator to “TIME”. 2.
TO PRESERVE THE QUALITY OF YOUR WATCH Your watch contains a highly precise electronic circuit and a crystal oscillator, and to maintain its high accuracy you should not subject it to violent shocks or extreme temperatures. Your watch is classified into one of the following four groups by the degree of water resistance. Please read the appropriate item below for proper use. If your watch is water resistant, “WATER RESISTANT” is shown on the back of your watch case.
W a t e r r e s i s t a n t ( 1 0 0 m / 1 0 B A R , 2 0 0 m / 2 0 B A R ) : These watches are suitable for swimming or skin diving (without heavy breathing apparatus), but not for scuba diving. If the watch is exposed to salt water, rinse it in fresh water and then wipe it thoroughly dry. Do not press any buttons or turn the crown when the watch is wet. N o n - w a t e r r e s i s t a n t : Care should be taken not to get your watch wet as water may damage the movement.