CAL.
MODE CHANGE C English PM A A With each press, the mode in the digital display changes in the following order: ➡ STOPWATCH ➡ TIMER ➡ REGULAR ALARM ➡ TIME/ CALENDAR 2 C Press in TIME/CALENDAR mode to show SINGLE-TIME ALARM mode.
SCREW DOWN CROWN [for models with screw down crown] Unlocking the crown 1 Turn Crown counterclockwise until you no longer feel the threads turning. 2 Crown can be pulled out. 1 Push Crown back in to normal position. English Locking the crown 2 Turn Crown clockwise while pressing it lightly until tight.
TIME/CALENDAR MODE ● Before setting the analogue time, be sure to set the digital time. DIGITAL TIME/CALENDAR SETTING Day A Date English ▲ A C Press to show TIME/ CALENDAR mode. Press for 2 to 3 seconds. ▲ ▲ PM C ▲ A D D Select the digits to be adjusted.✽ Set the flashing digits. ▲ A 4 Return to TIME/CALENDAR mode.
✽ Selection of the digits 12-/24-hour indication ➾ ➾ Seconds ➾ Minutes ➾ Hour ➾ Year ➾ Month ➾ Date ANALOGUE TIME SETTING Second hand CROWN Minute hand 1 Pull out when the second hand is at the 12 o’clock position. ➠ 2 Turn to set the hour and minute hands. ➠ 3 Push back in to normal position when the second digits count “00” in the digital time display.
CHANGEOVER OF DISPLAYS D With each press in TIME/CALENDAR mode, the display changes in the following order: ➡ Calendar display ➡ Blank display English ➡ Time/calendar display DEMONSTRATION FUNCTION ● The watch shows the modes and displays in order. D Press for 2 to 3 seconds in TIME/CALENDAR mode to start the demonstration.
STOPWATCH MODE ● The stopwatch measures up to 24 hours in 1/100 second increments for the first hour and in 1 second increments thereafter. A Press to show STOPWATCH mode.
TIMER MODE ● The timer can be set up to 9 hours and 59 minutes in minute increments. ● The remaining time is displayed in seconds. Press to show TIMER mode. TIMER SETTING A ▲ C C ▲ D D A 8 Select the digits to be adjusted (hour/minutes). Set the flashing digits. ▲ A Press for 2 to 3 seconds. ▲ English A Return to TIMER mode.
TIMER OPERATION Start / Stop / Restart D Reset English C * When the set time is up, a warning sound beeps for 10 seconds. To stop it manually, press any of the buttons.
REGULAR ALARM MODE ● The regular alarm can be set to ring on a 24-hour basis. A Press to show REGULAR ALARM mode. English REGULAR ALARM SETTING A ▲ ▲ C C ▲ PM D 10 D Select the digits to be adjusted (hour/minutes). Set the flashing digits. ▲ A Press for 2 to 3 seconds. A Return to REGULAR ALARM mode.
* The regular alarm mark is automatically displayed and the regular alarm is engaged. ENGAGEMENT/DISENGAGEMENT OF REGULAR ALARM AND HOURLY TIME SIGNAL C With each press, the engagement/ disengagement of the regular alarm and hourly time signal are made as follows: PM English C ▲ Regular alarm engaged ▲ Hourly time signal engaged ▲ Both engaged Hourly time signal mark ▲ Regular alarm mark Neither engaged * At the designated time, the regular alarm rings for 20 seconds.
SINGLE-TIME ALARM MODE ● The single-time alarm can be set to ring only once at the designated time. As it rings, it is automatically disengaged. ● The single-time alarm can be set in minute increments starting from the current time. A Designated alarm time C C 12 or D Set the desired alarm time. ▲ A Press to show SINGLETIME ALARM mode. ▲ C 1-AL PM Press to show TIME/ CALENDAR mode. ▲ English SINGLE-TIME ALARM SETTING Single-time alarm mark D Current time A Return to TIME/CALENDAR mode.
* At the designated time, the single-time alarm rings for 20 seconds. To stop it manually, press any of the buttons. ● To cancel the single-time alarm you have set, press buttons C and D at the same time in the SINGLE-TIME ALARM mode, or press button C or D to set the alarm time to the current time. B B PM English ILLUMINATING LIGHT (Electroluminescent panel) Press in any mode. * The digital display is evenly illuminated for 3 seconds.
ViViDiGi ● is a new type of liquid crystal panel that makes possible various colors and high contrast. English ● Excellent light reflection and transmission make the display bright and clear. ● Various color options are available. ● Either the whole panel or the displayed data only can be illuminated. * Features vary in different models.
English ● Setting the seconds: • With the second digits flashing, press button D in accordance with a time signal. The second digits are reset to “00”. • When the seconds count any number from “30” to “59” and button D is pressed, one minute is added and the seconds are reset to “00”. ● The flashing digits except the seconds and 12-/24-hour indication move quickly if button D is kept pressed. ● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
English TIMER MODE 16 [TIMER SETTING] ● Before setting the desired time for the timer, reset the digits to “0:00'oo” by pressing button D. ● The flashing digits move quickly if button D is kept pressed. ● If the watch is left untouched with the digits flashing, it will automatically return to the TIMER mode in 1 to 2 minutes. [TIMER OPERATION] ● Restart and stop of the timer can be repeated by pressing button C.
button C to engage/disengage the regular alarm/hourly time signal as desired. SINGLE-TIME ALARM MODE ILLUMINATING LIGHT (Electroluminescent panel) ● The display remains illuminated if button B is kept pressed. ● When button B is pressed in the calendar or blank display of the TIME/CALENDAR mode, the time/calendar display is shown while the display is illuminated. ● The electroluminescent panel loses its luminance as the battery voltage gets lowered. Also, its luminance level decreases gradually with use.
BATTERY CHANGE 2 English Years Battery life : Approx. 2 years Battery : SEIKO SR626SW, 1 piece (for analogue display) SEIKO SR41W, 1 piece (for digital display) ● The battery life may be less than 2 years if the alarm is used for more than 10 seconds a day and/or the illuminating light more than once (for 3 seconds) a day. ● Even if either of the two batteries has run down, replace both of them with new ones.
Press and hold buttons A, B, C and D at the same time for 2 to 3 seconds. When the buttons are released, “12:00'00" a.m., Jan. 1st, 2000, SAT” will be displayed. * Before using the watch, set the time/calendar and then, the alarm. WARNING English ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately.
TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Water resistance (5 bar)* English If “WATER RESISTANT 5 BAR” ● Non-water resistant is inscribed on the case back, your If “WATER RESISTANT” is not watch is designed and manuinscribed on the case back, your 5 bar WR factured to withstand up to 5 bar watch is not water resistant, and care should be taken not to get it and is suitable for swimming, yachting and taking wet as water may damage the movement. If a shower.
* Before using the water resistance 5, 10, 15 or 20 bar watch in water, be sure the crown is pushed in completely. Do not operate the crown when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely. * When taking a shower with the water resistance 5 bar watch, or taking a bath with the water resistance 10, 15 or 20 bar watch, be sure to observe the following: • Do not operate the crown when the watch is wet with soapy water or shampoo.
MAGNETISM English The analogue unit of your watch will be adversely affected by strong S N magnetism, though the digital unit will not be affected. Keep the watch away from close contact with magnetic objects. 22 SHOCKS & VIBRATION CARE OF CASE AND BRACELET To prevent possible rusting of the case and bracelet caused by dust, moisture and perspiration, wipe them periodically with a soft dry cloth.
CHEMICALS Be careful not to expose the watch to solvents, mercury, cosmetic spray, detergents, adhesives or paints. Otherwise, the case, bracelet, etc. may become discolored, deteriorated or damaged. The IC (Integrated Circuit) used in your watch will be affected by static electricity which may disturb the display. Keep the watch away from close contact with objects such as TV screens which emit strong static electricity.
English
