Operation Manual

16
English
TIMER MODE
[TIMER SETTING]
● Before setting the desired time for the timer, reset the digits to “0:00'oo” by pressing
button D.
● The flashing digits move quickly if button D is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIMER mode in 1 to 2 minutes.
[TIMER OPERATION]
● Restart and stop of the timer can be repeated by pressing button C.
● Even if the TIMER mode is changed to another while the measurement is in progress,
it continues counting properly. After the timer is used, however, be sure to reset it as
the battery energy is consumed enormously to shorten the battery life.
REGULAR ALARM MODE
[REGULAR ALARM SETTING]
● The flashing digits move quickly if button D is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
REGULAR ALARM mode in 1 to 2 minutes.
● When the time function is displayed in the 24-hour indication, the regular alarm is also
displayed in the 24-hour indication.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
Only the “PM” mark is displayed. For the AM setting, there is no indication. In the 24-
hour indication, “24” is displayed.
● Regular alarm test: The regular alarm can be tested by keeping button C pressed in
the REGULAR ALARM mode. After the alarm is tested, press