User Instructions

P-POE2
v.1.0
P-POE2
Splitter 2xRJ45 (plug) - 1xRJ45 (socket)
Edition: 1 from 24.06.2019
Supercedes edition: ----------------------
1. Technical description
Splitter P-POE2 enables transfer of power and data to two IP PoE cameras or other devices, that are compliant
with this standard, using UTP twisted pair cable cat. 5e. It uses 4 pairs of wires, where two pairs support one device, while
the other two support second device. This requires only the use of accessories that are compliant with the 802.3af/at mode
A (endspan) standard, transmit data and power supply in pairs 1/2 and 3/6. Device is designed to work in 10/100Mb/s
networks.
.
Connection schemes
Fig. 1.
Fig. 2.
EN
Pulsar sp. j.
Siedlec 150, 32-744 Łapczyca, Polska
Tel. [phone], Fax. [phone]
e-mail: [e-mail], [e-mail]
http:// www.pulsar.pl, www.zasilacze.pl
WEEE MARKING
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect
such WEEE separately.