Data Sheet

P.-TRPV1 v.1.1/II
P-TRPV1 set of passive HD video and power transmitters
CODE
TYPE:
:
DESCRIPTION
The P-TRPV1 is a set of passive devices used for HD video and power transmission using a twisted pair
cable.
The video signal is transmitted using one twisted pair, while the power is supplied using two twisted pair cables. The
set of devices matches the impedance of the coaxial cable (75Ω) to the impedance of the symmetrical cable (100Ω).
In order to achieve the best transmission quality and interference immunity, use UTP cable cat. 5 (or higher). Make
sure the cable is properly prepared when making the connection.
Caution! An improperly made cable may cause damage to the camera.
The P-TRPV1 modules are terminated with two types of connectors:
a) the BNC plug (HD-CVI / HD-TVI / AHD video transmission),
b) JACK 2,1 / 5,5 power socket (camera power supply).
The module is equipped with LED (located indoor the RJ45 connector). Red LED indicating the supply voltage.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
P-TRPV1 set of passive HD video and power transmitters
The video signal
1,0 V
p-p
, 75 Ω
Video transmission range (UTP 5e or higher)
HDCVI
720p 450m
1080p 250m
3 / 4 / 8 Mpx 180m
HD-TVI
720p 230m
1080p 230m
3 / 4 / 5 / 8 Mpx 200m
AHD
720p 320m
1080p 200m
3 / 4 / 5 / 8 Mpx 200m
CVBS 960H 450m
Video bandwidth
0 ... 50 MHz ( -3 dB )
Impedance of the coaxial connector / connector
type
75 Ω / BNC plug (on the cable 100mm)
Impedance of the unbalanced connector /
connector type
100 Ω / RJ45 socket
Attenuation (loop-through)
-0,5dB / 5MHz
CMRR
60dB / 5MHz
The maximum permissible input voltage
12-15 V DC
The maximum permissible current
1 A (for 12 V)
Operation temperature
-10 °C ÷ 55 °C
Storage temperature
-40 °C ÷ 60 °C
Permissible relative humidity
<95%
Dimensions
22 × 10 × 40mm (with cable - 180mm length)
Net / gross weight
0,075kg
Declarations, warranty
CE, one year from the production date
Pulsar
®
TECHNICAL DATA
WEEE MARK
According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted
municipal waste and to collect such WEEE separately.