Data Sheet

ManualsBrandsPulsar Manuals13PSBEN 13.8V/5A/40Ah/EN buffer, switch mode power supply unit Grade 3

Table Of Contents

PSBEN 5012D v.1.1/IX

PSBEN 13,8V/5A/40Ah/EN buffer, switch mode power supply unit Grade 3.

CODE:

TYPE:

EN**

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl

PSBEN/LED series power supply unit

Buffer, switch mode power supply unit 13,8 V DC Grade 3

Pulsar

This product is suitable for the systems

designed in compliance with the EN 50131-6

grade 1, 2 or 3 and II environmental class.”

Requirements of

EN 50131-6 Functional requirements

Grade 1 Grade 2 Grade 3

PSBEN5012D

EPS network absence YES YES YES YES

Battery low voltage YES YES YES YES

Protection against full battery discharge - - YES YES

Battery fault - - YES YES

No battery charge - - YES YES

Output low voltage - - YES YES

Output high voltage - - YES YES

PSU fault - - YES YES

Surge protection - - YES YES

Short circuit protection YES YES YES YES

Overload protection YES YES YES YES

Output fuse activation - - - YES

Battery fuse fault - - - YES

EPS technical output YES YES YES YES

APS technical output YES YES YES YES

PSU technical output YES YES YES YES

Collective failure input - - - YES

Remote battery test - - - YES

Tamper resistance – enclosure opening YES YES YES YES

Tamper resistance – detachment from the

mounting surface

- - YES YES

BLACK POWER

Summary of content (6 pages)

PAGE 1
Pulsar PSBEN/LED series power supply unit Buffer, switch mode power supply unit 13,8 V DC Grade 3 EN** CODE: PSBEN 5012D v.1.1/IX TYPE: PSBEN 13,8V/5A/40Ah/EN buffer, switch mode power supply unit Grade 3. BLAC K PO WER H H1 D1 W W1 This product is suitable for the systems designed in compliance with the EN 50131-6 grade 1, 2 or 3 and II environmental class.
PAGE 2
PSBEN/LED series power supply unit Pulsar Buffer, switch mode power supply unit 13,8 V DC Grade 3 PSU features: · EN50131-6 compliance, 1÷3 grades and II environmental class · mains supply of ~230 V · uninterrupted voltage of 13,8 V DC · fitting battery: 40 Ah/12 V · high efficiency 77% · PSU current efficiency: · 3,33 A – for grades 1 , 2 * · 1,33 A – for grades 3 ** · 5 A – for general use *** (see: chapter 3.
PAGE 3
PSBEN/LED series power supply unit Pulsar Buffer, switch mode power supply unit 13,8 V DC Grade 3 SPECIFICATIONS PSU type Mains supply Current consumption A, protection class 1÷3, II environmental class ~230 V; 50 Hz 0,68 A PSU’s power Efficiency Output voltage 78 W 77% 11,0 V÷13,8 V DC – buffer operation 10,0 V÷13,8 V DC – battery-assisted operation - for grades 1, 2: Io = 3,33 A + 2,2 A battery charging - for grade 3: Io = 1,33 A + 3 A battery charging - (connection with ARC required, compliant with
PAGE 4
Pulsar PSBEN/LED series power supply unit Buffer, switch mode power supply unit 13,8 V DC Grade 3 Parameters remote control system. (additional modules required) POWER SECURITY PSBEN 13,8V / 5A PSBEN 13,8V / 10A 4,1A 5,9A PSBEN 27,6V / 2A 27,6V PSBEN 27,6V / 3A 1,7A 27,6V 27,6V 2,5A 27,6V Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.
PAGE 5
PSBEN/LED series power supply unit Pulsar Buffer, switch mode power supply unit 13,8 V DC Grade 3 Remote monitoring (options: Ethernet, RS485). The PSU has been adjusted to operate in a system that requires a remote control of the parameters in a monitoring centre. Transmitting data concerning PSU status is possible due to an additional, external communication module responsible for communication in Ethernet or RS485 standard. ETHERNET network communication.
PAGE 6
PSBEN/LED series power supply unit Buffer, switch mode power supply unit 13,8 V DC Grade 3 OPTIONAL POWER SUPPLY CONFIGURATIONS: 1. Buffer power supply PSBEN 13,8 V/5x1 A/40 Ah/INTERFACE - PSBEN 5012D + LB8 5x1 A (AWZ579, AWZ580)+40 Ah+INTERFACE 2. Buffer power supply PSBEN 13,8 V/12 V/40 Ah/INTERFACE - PSBEN 5012D + RN500 (13,8 V/12 V)+40 Ah+INTERFACE 3. Buffer power supply PSBEN 13,8 V/12 V/5x1 A/40 Ah - PSBEN 5012D + RN500 (13,8 V/12 V)+LB8 5x1 A (AWZ579, AWZ580)+40 Ah Tel.