Data Sheet

PSBOC15512110
PSBOC 13,8V/11A/OC
with technical outputs
v.1.1/IX
Enclosed buffer switch mode power supply unit
.
CODE
TYPE:
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail:[e-mail]
Pulsar
®
DESCRIPTION
A buffer PSU is intended for an uninterrupted supply to devices requiring stabilized voltage of
12V DC (+/-15%). The PSU provides voltage of 13,8V DC with current capacity:
1. Output current 10A + 1A battery charging*
2. Output current 7A + 4A battery charging*
Total device current + battery: 11A max*.
In the case of power failure from prime supply, the unit is instantly switched to battery assisted
operation. The power supply unit features: short circuit, overload, surge and over voltage protections.
PSBOC series power supply unit
Enclosed buffer switch mode power supply unit 13,8V DC with technical outputs
Features:
· 13,8VDC/11A uninterrupted supply*
· wide range of supply voltage 176÷264VAC
· high efficiency 83%
· battery charge and maintenance control
· deep discharge battery protection (UVP)
· battery charging current 1A/4A
jumper selectable
· battery output protection against short circuit
· and reverse polarity connection
· LED indication
· EPS technical output indicating AC power loss
– OC and relay type
· PSU technical output indicating PSU failure
– OC and relay type
· LoB technical output indicating battery low voltage
– OC and relay type
· protections:
· SCP short-circuit protection
· OVP over voltage protection
· surge protection
· OLP overload protection
· warranty – 2 year from the production date
* See chart 1
L
H
W