Data Sheet

EN/III
IN / PWY
100%
70%
ACCESORIES
ACCESORIES:
[1] adapter CABLE - PLUG DC 5,5/2,1 - code ML109
For power supplies are available
accessories - fuse blocks and cable adapter.
For details –visit .www.pulsar.pl
Graph 1.
Relation between output current and ambient
temperature (instantaneous load).
Fig.1 Dimension of power supply.
30°C
40°C
ta
0°C
PSCL12050
CODE:
TYPE:
PSCL 12V/5A switch mode power supply
DESCRIPTION
Stabilized DC power supply is intended for supply equipments that require stabilised voltage of
12 V DC. When connected to fuse blocks of the LB4/xx/xx or LB8/xx/xx family, the power supply unit can
feed more equipments (max. 4 or 8). The power supply unit is protected against short-circuit, overload and
overvoltage.
SPECIFICATIONS.
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
PSCL series power supply
Switch mode power supply 12VDC, IP67
Pulsar
®
Features of the power supply unit:
· power output 5 A/12 V DC*
· universal AC input voltage
range 90÷264 V
· high efficiency 87%
· standby power <0,5W
· efficiency level: V
· IP 67 case
· protections:
· SCP short-circuit protection
· overvoltage protection (AC input)
· overload (OLP)
· warranty – 2 year from the production date
Supply voltage 90 ÷ 264 V AC 50÷60Hz
Current consumption 0,6 A@ 230 V max.
Supply power 60 W max.
Efficiency 87%
Output voltage 12 V DC
Output current t
AMB
<30°C 5 A - refer to graph 1.
Output current t
AMB
=40°C 3,5 A - refer to graph 1.
Ripple voltage 100mV p-p max.
Short-circuit protection SCP electronic, automatic recovery
Overload protection OLP 150-200% of power supply, automatic recovery
IP protection class IP67
Operation conditions temperature -10
o
C÷40
o
C
relative humidity 20%...90% without condensation
Dimensions (LxWxH) 150 x 56 x 34 [mm]
Net/gross weight 0,40kg / 0,46kg
Protection class EN 60950-1:2007 II (second)
Lenght of DC cable 0,5 m + DC plug 5,5 / 2,1 female
Lenght of AC cable 0,3 m
Storage temperature -20ºC...+60ºC
* In order to extend the life of the power supply, the load current of 3,5 A is recommended.
* Refer to graph 1