Data Sheet

wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
SPECIFICATIONS
Power supply 176 ÷ 264V AC
Current consumption 1,36A@230VAC max.
PSU power 200W max.
Efficiency 85%
Output voltage 12V DC
Output current
16 x 0,87A
Output voltage adjustment range 12V÷ 15V DC
Ripple voltage 100mV p-p max.
Short-circuit protection SCP
LB8/AW (A, B) STRIP
16x F 1A (fuse) or PTC 1A
PSU MODULE
105% ÷ 150% of PSU power, electronic current limiting
Overload protection OLP 105% ÷ 150% of PSU power, electronic current limiting
Surge protection varistors
Surge over voltage protection OVP >16V (automatic recovery)
Tampering protection system
- TAMPER – indicating unwanted
opening of the PSU’s enclosure
- microswitch, NC contacts (enclosure closed), 0,5A@50V DC
(max.)
Technical outputs:
- FPS (A, B) outputs indicating fuse
failure (blow), strips LB8/AW A, B
(SCP activation)
- OC type, 50mA max,
normal status: L level (0V),
failure: hi-Z level
LED indication LEDs
Operating conditions 2nd environmental class, temperature: -10
o
C÷40
o
C, relative
humidity 20%...90%, without condensation
Enclosure Steel plate DC01 0,7mm thick, colour: RAL9003
Dimensions W=290, H=256, D+D
1
=52+8 [+/- 2 mm]
W
1
=294, H
1
=260 [+/- 2 mm]
Net/gross weight 2,3 / 2,4 kg
Closing Cheese-head screw: at the front
Declarations, warranty CE, 3 year from the production date
Notes The enclosure does not adjoin the assembly surface so that cables
can be led.
Convectional cooling.
PSDC series power supply unit
Power supply 12V DC for up to 16 HD cameras
Pulsar
®