PSDCB09129C v.1.0 PSDCB 13,8V/9A/9x1A/17Ah Buffer power supply for up to 9 HD cameras. EN Edition: 7 from 15.11.2017 Supercedes the edition: 6 from 24.04.
www.pulsar.
www.pulsar.pl PSDCB09129C 1. Technical description. 1.1 General description. A buffer PSU is intended for an uninterrupted supply to devices requiring stabilised voltage of 12V DC (+/-15%). The PSU provides voltage of U=13,8V DC. Current efficiency: 1. Output current 9x1A + 1A battery charge 2. Output current 9x0,77A + 4A battery charge Total device current + battery: 11A max*. In case of power decay, a battery back-up is activated immediately.
www.pulsar.pl PSDCB09129C Fig. 2. The view of the fuse block LB9. Table 2. Description of PSU components and connectors ( tab.2) Element no. Description [Fig.
www.pulsar.pl PSDCB09129C 1.4 Specifications: - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Electrical parameters (tab. 3) Mains supply Current up to Supply power Efficiency Output voltage 176÷264V AC 1,4A@230V AC 155W max.
www.pulsar.pl PSDCB09129C Operation safety (tab.5) Protection class PN-EN 60950-1:2007 Protection grade PN-EN 60529: 2002 (U) Electrical strength of insulation: - between input and output circuits of the PSU (I/P-O/P) - between input circuit and PE protection circuit (I/P-FG) - between output circuit and PE protection circuit (O/P-FG) Insulation resistance: - between input circuit and output or protection circuit Operating parameters (tab.
www.pulsar.pl PSDCB09129C 2.2 Installation procedure. 1. Before installation, cut off the voltage in the 230V power-supply circuit. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230V AC) to L-N clips of the PSU. Connect the ground wire to the clip marked by the earth symbol PE (PSU module connector). Use a three-core cable (with a yellow and green PE protection wire) to make the connection.
www.pulsar.pl PSDCB09129C WEEE MARK According to the EU WEE Directive – It is required not to dispose of electric or electronic waste as unsorted municipal waste and to collect such WEEE separately. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar sp. j. Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax. (+48) 14-610-19-50 e-mail: biuro@pulsar.pl, sales@pulsar.