User Instructions

ManualsBrandsPulsar ManualsMulti-outputPSDCSEP 12V/4A/4×1A/TOPIC power supply for up to 4 HD cameras, adjustable for each channel

PSDCSEP04124

v.1.0

PSDCSEP 12V/4A/4x1A/TOPIC

Power supply for up to 4 cameras,

adjustable for each channel.

EN**

Edition: 3 from 08.06.2017

Supersedes the edition: 2 from 25.05.2015

Summary of content (6 pages)

PAGE 1
PSDCSEP04124 v.1.0 PSDCSEP 12V/4A/4x1A/TOPIC Power supply for up to 4 cameras, adjustable for each channel. EN** Edition: 3 from 08.06.2017 Supersedes the edition: 2 from 25.05.
PAGE 2
www.pulsar.pl PSDCSEP04124 Features:        the 4x 1A/12V DC power output for powering cameras output voltage adjustment 12V÷ 15VDC wide range of supply voltage 85÷264VAC 4 independent, galvanically separated outputs 4 outputs protected independently by 1A fuses high efficiency 81%  protections:  SCP short-circuit protection  OVP over voltage protection  surge protection  OLP overload protection warranty – 2 year from the production date An example of power supply for cameras.
PAGE 3
www.pulsar.pl PSDCSEP04124 1.2. Block diagram (fig.1). Fig.1. Block diagram of the PSU. 1.3. Description of PSU components and connectors. Table 1. Elements of the PSU pcb (see fig. 2). Element no. Description [1] IN1 ÷ IN4 Input of the DC supply [2] F1 ÷ F4 fuses in circuits AUX (+) [3] L1 ÷ L4 green LEDs [4] AUX1 ÷ AUX4 independently protected outputs (galvanically isolated) Fig.2. The view of the PSU’s pcb. Table 2. Elements of the PSU (see fig. 3). Element no.
PAGE 4
www.pulsar.pl PSDCSEP04124 Fig.3. The view of the PSU. 1.4. Specifications: - electrical specifications (tab.3) - mechanical specifications (tab.4) - operation safety (tab.5) - operating specifications (tab.6) Electrical specifications (tab. 3).
PAGE 5
www.pulsar.pl PSDCSEP04124 Mechanical specifications (tab. 4). W=205, H=215, D+ D1=72+8 [+/- 2mm] W 1=210, H1=220 [+/- 2mm] Fixing 180 x 180 x 4 szt. Φ 6 (WxH) Net/gross weight 2,3/2,5 kg Enclosure Steel plate, DC01 0,7mm colour: RAL 9003 Closing Cheese-head screw x 2: at the front Connectors Power supply: 230V AC: Φ0,64-2,05 (AWG 22-14) AUX outputs: Φ0,51- 2,05 (AWG 24-12) LB4/SEP: Φ0,51- 2,05 (AWG 24-12) Notes The enclosure does not adjoin the assembly surface so that cables can be led.
PAGE 6
www.pulsar.pl PSDCSEP04124 2.2 Installation procedure. 1. Before installation, make sure that the voltage in the 230V power-supply circuit is cut off. 2. Mount the PSU in a selected location and connect the wires. 3. Connect the power cables (~230VAC) to L-N terminals of the PSU. Connect the ground wire to the terminal marked by the earth symbol. Use a three-core cable (with a yellow and green PE protection wire ) to make the connection.