Data Sheet

Table Of Contents
PSUPS 10A12CR v.1.2/IV
PSUPS 13,8V/12V/10A/17Ah
and DVR .
Buffer power supply for up to 8 HD cameras
with recorder space
CODE:
TYPE:
DESCRIPTION
A buffer PSU is intended for an uninterrupted supply to CCTV system devices requiring stabilized voltage of
12 V DC (+/-15%). The PSU has two circuits: first 1x4 A / 12 V DC for supplying the recorder and 8x0,75 A /13,8 V DC for both
cameras. Current efficiency of the PSU amounts to:
Output current 8x0,75 A + 4 A recorder + 1 A battery charging *
Total current of the receivers + battery 11 A* max.
In case of a mains power loss 230 V a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17Ah
batteria). The electricity consumption for own needs and the energy efficiency of the power intake track were taken
into account. The exact description of how to perform the calculations can be found at:
.
The power supply unit is placed in a metal enclosure (color RAL 9003) with space for 17Ah / 12 V batteries and a
recorder. The enclosure construction is compliant with the requirements of the General Data Protection Regulation
GDPR (the possibility of installing two locks with different codes). The enclosure is equipped with a micro-switch
indicating unwanted opening of the door (faceplate).
"Approximate backup time -
assumptions for calculations"
wyjście TAMPER : przewody 30cm
Tel .+48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl
PSUPS series power supply unit
Buffer power supply for up to 8 HD cameras and DVR with recorder space
EN**
Features:
· DC 13,8 V uninterruptible power supply of HD cameras
· DC 12 V uninterruptible power supply of the
recorder
· fitting battery 17Ah/12 V
· recorder space 380x320x65
· wide range of mains supply ~200-240 V
· high efficiency 80%
· 8 outputs protected by 1A glass fuses for
powering cameras
· 12 V/4 A output dedicated to supply the recorder
· battery charge and maintenance control
· battery output protection against short circuit
and reverse polarity connection
· battery charging current 1 A
· approximate backup time: 1h 30min
· deep discharge battery protection (UVP)
· LED indication
· the enclosure construction is compliant with the
requirements of the General Data Protection
Regulation GDPR (the possibility of installing
two locks with different codes)
· protections:
· SCP short-circuit protection
· OLP overload protection
· OVP over voltage protection
· OHP overheat protection
· surge protection
· against sabotage
· warranty – 2 years from the production date
* See chart 1
Pulsar
®
W
H
D
W
1
H
1
D
1
Recorder
space
W x H
2 2
D
2

Summary of content (2 pages)