Data Sheet

wyjście TAMPER : przewody 30cm
Chart 1. Acceptable output current from the PSU
depending on ambient temperature.
SPECIFICATIONS
PSU type A (EPS - External Power Source)
Mains supply ~200-240 V; 50Hz
Current consumption 1,3 A
PSU’s power 150 W
Efficiency 80%
Output voltage – strips fuse base 8x
Output voltage – recorder
11 V ÷ 13,8 V DC – buffer operation
9,5 V ÷ 13,8 V DC – battery-assisted operation
12 V DC maintained regardless of the state of battery charge
Output current t
AMB
<30°C 8x0,75 A + 4 A recorder + 1A battery charging*
Total current of the receivers + battery 11 A* max.
* see chart 1
Output current t
AMB
=40°C 8x0,35 A + 4 A recorder + 1A battery charging*
Total current of the receivers + battery 7,7 A* max.
* see chart 1
Output voltage adjustment range 12-14 V DC
Ripple voltage 120mV p-p max.
PSU current consumption 0,25 A
Battery charging current 1A
Approximate backup time 1h 30min
Short-circuit protection SCP - circuit of
cameras
STRIP LB8: 8x F 1 A glass fuse,
Output filter 1xF 5 A
Overload protection OLP 105% ÷ 150% of the PSU power, automatic recovery
Short-circuit protection SCP - circuit of
recorder
F5 A melting fuse in the filter
Battery circuit protection SCP and reverse
polarity connection
glass fuse 15 A
Surge protection varistors
Over voltage protection OVP >16 V (automatic recovery)
Deep discharge protection UVP U<9,5 V (± 5%) – disconnection of battery terminal
Sabotage protection:
- TAMPER output indicating enclosure
opening
- micro-switches, NC contacts (enclosure closed),
0,5 A@50 V DC (max.)
Optical indication: front panel of the PSU
- AC OK.; LED indicating the AC power
status
- DC OK.; LED indicating the DC supply at
the PSU output
- red, normal status – on, failure: off
- green, normal status – on, failure: off
Operating conditions 2nd environmental class, -10
o
C ÷ +40
o
C
Enclosure Steel plate DC01 1,0mm, RAL 9003
Dimensions W=420, H=535, D+D
1
=193+14 [+/- 2mm]
W
1
=425, H
1
=540 [+/- 2mm]
The dimensions of the recorder compartment W
2
=380, H
2
=320, D
2
=65 [+/- 2mm]
The dimensions of the battery compartment 180 x 170 x 80 mm (WxHxD) max
Net/gross weight 8,33 / 9,06 kg
Closing Cheese head screw x 2 (at the front)
The possibility of installing two locks with different codes.
Deklarations, warranty CE, 2 year from the production date
Notes The enclosure does not adjoin the assembly surface so that cables can
be led. Forced cooling - built-in fan.
PSUPS series power supply unit
Buffer power supply for up to 8 HD cameras and DVR with recorder space
Pulsar
®
Tel .[phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]