User Instructions

www.pulsar.pl PSUPS10A12CR
4
1.3. Description of PSU components.
Table 1. Description of components and connectors module LB8
Component no.
[Fig. 2]
Description
F1÷F8 glass fuses
L1÷L8 LED voltage indication at the outputs
AUX1 ÷ AUX8 independently protected outputs
IN1-, IN2- power supply inputs of the fuse module
Table 2. Description of components and connectors
Component no.
[Fig. 3]
Description
F
AUX
glass fuses
protection connector
AUX – output
IN – power supply inputs, output filter
Fig.2. The view of the fuse module LB8.
Fig.3. Output filter.
Table 3. Description of the module’s components and connectors.
Component no.
[Fig. 4]
Description
PSU module
Connectors of the PSU:
L-N 230 V power connector, protection connector
green LED indicates DC power
P1 potentiometer, output voltage adjustment
Battery outputs: red: +, black: -
TAMPER, contact of tamper protection (NC)
Fuse module LB8
DC/DC 50SE-SEP converter
Output filter
Cable for supplying recorder there is plug DC 2,1/5,5