Full Product Manual

Step 1

Open the cover of the detergent reservoir by twisting it off.

Step 2

Fill the detergent reservoir with any approved liguid detergent.

Close the cover.

2000 PSI Pressure Washer

Step 3

Attach the soap spray nozzle.

Step 4

To apply the detergent to your work area. Turn the pressure washer switch

to the ON position. Pull the trigger to operate the unit. The pressure washer will mix

the detergent with water. Do not allow the detergent to dry on the object that you are

cleaning.

WARNING: NEVER USE PRODUCTS WITH BLEACH OR CHLORINE

OR ANY OTHER CORROSIVE MATERIALS, INCLUDING LIQUIDS

CONTAINING SOLVENTS (I.E. GAS, OILS ETC), TRI-SODIUM

PHOSPHATE PRODUCTS, AMMONIA, OR ACID-BASED CLEANERS.

THESE CHEMICALS WILL HARM THE UNIT AND CAUSE DAMAGE

TO THE SURFACE BEING CLEANED. ALWAYS READ THE LABEL.