Full Product Manual

8
Step 4
2000 PSI Pressure Washer
OPERATING INSTRUCTIONS
THIS UNIT IS INTENDED TO BE USED WITH COLD WATER ONLY!
DO NOT USE HOT WATER IN THIS PRESSURE WASHER!
Starting Up
After connecting the pressure washer to your cold
water supply, proceed as follows:
-
Make sure that the on/off switch is
in the off position.
- Connect the garden hose with a quick
connect to the inlet fitting.
- Attach the hose to the gun as per
assembly instruction step #1.
- Insert the adjustable spray nozzle
into the gun as per assembly.
Remove the plastic cap on the garden hose
connector which is inserted onto the male
fitting on the pressure washer before shipping.
This plastic cap can be discarded once removed.
Attach the garden hose with connector screw
on the pressure washer. Connect the
garden hose to the waterspout.