Use and Care Manual

Operating Instructions & Parts Manual

2 Inch & 3 Inch Water Pump

Draining The Fuel Tank And Carburetor

1. Place an approved gasoline container below the

carburetor, and use a funnel to avoid spilling fuel.

2. Remove the carburetor drain bolt and sediment cup, then

move the fuel valve lever to the ON position.

Warning! Gasoline is highly flammable

and explosive. You can be burned or seriously injured

when handling fuel.

• Stop the engine and keep heat, sparks, and flame

away.

• Handle fuel only outdoors.

• Wipe up spills immediately.

3. After all the fuel has drained into the container, reinstall

the drain bolt and sediment cup. Tighten them securely.

Engine Oil

1. Change the oil.

2. Remove the spark plug

3. Pour a tablespoon of clean engine oil into the

cylinder.

4. Pull the starter rope several times to distribute the oil

in the cylinder.

5. Reinstall the spark plug.

6. Pull the starter rope slowly until resistance is felt and

the notch on the starter pulley aligns with the hole at

the top of the recoil starter cover. This will close the

valves so moisture cannot enter the engine cylinder.

Return that starter rope gently.

Drain Bolt

Sediment Cup

Align notch

on pulley with

hole at top of

cover.