Data Sheet

R1612T
v.1.0/II
R 12V/16x1,5A/TOPIC
RACK mounted power supply for up to 16 HD cameras.
CODE:
TYPE:
DESCRIPTION
The R1612T power supply unit is designed for uninterrupted power supply of up to 16 HD cameras
requiring stabilized voltage of 12V DC with the total current efficiency of 14A. The output voltage adjustment
range is adjusted via a potentiometer within the range of 12V÷15V DC. The PSU is fitted with 16 outputs
protected independently with melting fuse 1,5A. The power supply is fitted with the ALARM output of collective
failure. In case of failure, relay contacts are switched automatically, which is accompanied by acoustic and
optical indication (the corresponding led goes on). The power supply construction is based on the switch
mode PSU with high energy efficiency and is located in an enclosure adapted for mounting in standard RACK
19” cabinets.
EN*
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
RACK POWER series power supply unit
12V DC for up to 16 HD cameras RACK mounted power supply
Features:
· DC 12V/16x0,87A uninterruptible power supply for
powering HD cameras (S I =14A max.)
· the adjustment of output voltage in the range
12V÷15V DC available from the front panel of the
power supply unit
· 16 outputs independently protected
by 1,5A melting fuses
· wide range of mains supply AC: 176÷264V AC
· high efficiency 80%
· LED optical indication: AC, DC, TEMP, LoB,
ALARM, AUX1 ÷ AUX16
· acoustic indication of failure
· control of voltage presence at the AUX1 ÷ AUX16
outputs
· the ALARM technical output of collective failure –relay
type, activated by:
· 230V AC power loss
· activation of the output fuse in the camera power
supply circuit
· too high temperature of the PSU (>70°C)
· the PSU failure
· protections:
· SCP short-circuit protection
· OVP overvoltage protection
· overvoltage protection
· overload protection OLP
· forced cooling (fan)
· warranty – 2 year from the production date