Data Sheet

ManualsBrandsPulsar Manuals1-output for recorderROUPS 12V/5A RACK mounted buffer power supply of recorder

ROUPS12VR v.1.0/II

ROUPS 12V/5A .RACK mounted buffer power supply of the recorder

CODE:

TYPE:

DESCRIPTION

The ROUPS12VR buffer power supply unit is designed for uninterrupted power supply of up to recorder

requiring stabilized voltage of 12V DC. The PSU provides voltage of U=12V DC current efficiency max. I=5A + 1A

battery charge. In case of power decay, a battery back-up is activated immediately. The output for the recorder is

protected with a 5A polymer fuse. The power supply is fitted with the ALARM output of collective failure. In case of

failure, relay contacts are switched automatically, which is accompanied by acoustic and optical indication (the

corresponding led goes on). The power supply construction is based on the switch mode PSU with high energy

efficiency and is located in an enclosure adapted for mounting in standard RACK 19” cabinets.

EN*

wyjście TAMPER : przewody 30cm

Tel. +48-14-610-19-40, fax: +48-14- 610-19-50, www.pulsar.pl, e-mail: sales@pulsar.pl

RACK POWER CCTV series power supply unit

RACK mounted buffer power supply of the recorder

Features:

· DC 12V/5A uninterruptible power supply of the

recorder

· outputs protected by 5A melting fuses

· the output voltage of 12V is supplied regardless

of the battery status

· wide range of mains supply AC: 176÷264V AC

· battery charging and maintenance control

· excessive discharging (UVP) protection

· battery output protection against short circuit

and reverse connection

· battery charge current: 1A

(batteries 1×7Ah / 1x17Ah / 1x28Ah)

· control of voltage presence at the output

· acoustic indication of failure

· LED optical indication: LED: AC, DC, TEMP, LoB,

ALARM, DVR

· the ALARM technical output of collective failure

– relay type, activated by:

· 230V AC power loss

· low voltage of the PSU (<11,5V)

· activation of the output fuse

· too high temperature of the PSU (>70°C)

· the PSU failure

· protections:

· SCP short-circuit protection

· OVP overvoltage protection

· overvoltage protection

· overload protection OLP

· forced cooling (fan)

· warranty – 2 year from the production date

Summary of content (2 pages)

PAGE 1
RACK POWER CCTV series power supply unit RACK mounted buffer power supply of the recorder CODE: TYPE: ROUPS12VR EN* v.1.0/II ROUPS 12V/5A RACK mounted buffer power supply of the recorder.
PAGE 2
RACK POWER CCTV series power supply unit RACK mounted buffer power supply of the recorder SPECIFICATIONS Mains supply: Current up to: Supply power: Efficiency Output voltage DVR - recorder Output current Ripple Battery charge current (batteries 1×7Ah / 1x17Ah / 1x28Ah) Short-circuit protection SCP Overload protection OLP Current consumption by PSU systems Overvoltage protection OVP Battery circuit protection SCP and reverse polarity connection Surge protection Excessive discharge protection UVP Optical ind