Data Sheet

RSFUPS108R
s
v.1.2/IV
RSFUPS108R 10-port switch with buffer power supply for 8 IP cameras
and recorder, RACK mounted
CODE:
TYPE:
DESCRIPTION
The RSFUPS108R is a complete solution for power supply and battery backup of 8 IP cameras ( V DC power
supply) and uninterruptible power supply of the DVR (12 V DC power supply) in RACK 19" standard.
The main elements of this system include:
- 10 port PoE switch
- buffer power supply 27,6 V unit which can accommodate two 12 V batteries
- a converter (DC/DC52230) increasing the voltage to 52 V DC (supply of the PoE switch)
- a buck converter (step-down converter) (DC/DC50SD) lowering voltage to 12 V DC (recorder power supply).
In case of mains power loss, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 28 Ah
batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into
account. The exact description of how to perform the calculations can be found at:
.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 8 ports of the switch.
The G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP
slots (marked as G1/SFP and G2/SFP); the use of fiber optic module (GBIC) allows fiber optic transmission. The LED
lights at the front panel indicate the operating status of the device.
The switch is fitted with the ALARM technical output of collective failure. In the case of failure, a LED light is
activated, which is accompanied by switching of relay contacts and acoustic indication.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP
phone, wireless access point or router.
52
"Approximate backup time -
assumptions for calculations"
EN*
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
s for 8 IP RSFUPS108R 10-port switch with buffer power supply cameras
and recorder, RACK mounted
Features:
· DC 52 V uninterruptible power supply of 8 IP cameras
· DC 12 V uninterruptible power supply of the recorder
· Switch 10 ports
8 PoE 10/100 Mb/s ports, (1÷8 ports) (data and power
supply)
2 ports 10/100/1000 Mb/s (ports G1/TP, G2/TP) (UpLink)
2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)
· 30 W for each PoE port, supports devices complaint with
the IEEE802.3af/at (PoE+) standard
· Supports auto-learning and auto-aging of MAC
addresses (1K size)
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery output protection against short circuit and
reverse connection
· battery charge current: 1 A
(batteries 2x7 Ah / 2x17 Ah / 2x28 Ah)
· Approximate backup time: 5 h 30 min
· voltage control at the NVR output
· acoustic indication of failure
· LED optical indication: AC, DC, TEMP, LoB,
ALARM, NVR
· the ALARM technical output of collective failure
– relay type, activated by:
· 230 V power loss
· low voltage of the PSU (<23 V)
· no voltage at the power supply output of the
recorder
· too high temperature of the PSU (>70 °C)
· the PSU failure
· protections:
· SCP short-circuit protection
· overvoltage protection
· overload protection OLP
· forced cooling (fan)
· warranty – 2 year from the production date
D
1
W
H
D
D
2
W
1