RSFUPS108R v.1.2 RSFUPS108R 10-port switch with buffer power supply for 8 IP cameras IP and recorder, RACK mounted EN Edition: 4 from 14.02.2019 Supercedes the edition: 3 from 09.03.
www.pulsar.pl RACK POWER RSFUPS108R Features: DC 52 V uninterruptible power supply of 8 IP cameras DC 12 V uninterruptible power supply of the recorder Switch 10 ports 8 PoE 10/100 Mb/s ports, (1÷8 ports) (data and power supply) 2 ports 10/100/1000 Mb/s (ports G1/TP, G2/TP) (UpLink) 2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports) 30 W for each PoE port, supports devices complaint with the IEEE802.
www.pulsar.pl RSFUPS108R RACK POWER 1. Technical description. 1.1. General description. The RSFUPS108R is a complete solution for power supply and battery backup of 8 IP cameras (52 V DC power supply) and uninterruptible power supply of the DVR (12 V DC power supply) in RACK 19" standard.
www.pulsar.pl RSFUPS108R RACK POWER Fig. 2. The view of the switch. Table 2. (See Fig. 3 and 4) Element no. [Fig.
www.pulsar.pl RSFUPS108R RACK POWER Fig. 4. Rear panel of the power supply. Fig. 5. The view of the PSU. 1.4. Specifications. - parameters of the switch (tab.3) - electrical parameters (tab.4) - mechanical parameters (tab.5) - operation safety (tab.6) - operating parameters (tab.7) Parameters of the switch (tab. 3).
www.pulsar.pl RACK POWER RSFUPS108R Electrical parameters (tab. 4).
www.pulsar.pl RACK POWER RSFUPS108R Operating parameters (tab.7). Environmental class Operating temperature Storage temperature Relative humidity Vibrations during operation Impulse waves during operation Direct insulation Vibrations and impulse waves during transport II -10 ºC...+45 ºC -20 ºC...+60 ºC 20 %...90 %, without condensation unacceptable unacceptable unacceptable According to PN-83/T-42106 2. Installation. 2.1. Requirements.
www.pulsar.pl RSFUPS108R RACK POWER 3. Indication of the device operation. 3.1. LED indication of operating status.
www.pulsar.pl RSFUPS108R RACK POWER OFF – connection 10 Mb/s or 100 Mb/s ON - connection 1000 Mb/s GREEN LED LIGHT (SPEED) CAUTION! The operating status of the G1/TP, G1/SFP, G2/TP and G2/SFP slots is shown on the LEDs located near the RJ45 connector (see below). CAUTION! G1/TP and G1/SFP or G2/TP and G2/SFP sockets can not operate simultaneously. These are COMBO type sockets. 3.3. Technical output. The power supply is fitted with the ALARM output of collective failure (relay type).
www.pulsar.pl RSFUPS108R RACK POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar sp. j.
