User Instructions

ManualsBrandsPulsar ManualsNetworkingRSFUPS116

RSFUPS116

v1.1

RSFUPS116 16-ports switch with buffer power supply

for 16 IP cameras, RACK mounted

Edition: 3 from 02.07.2018

Supercedes the edition: 2 from 15.11.2017

Features:

 DC 54V uninterruptible power supply of 16 IP cameras

 16 PoE ports 10/100 Mb/s, (1÷16 ports) (data and

power supply)

 2 ports 10/100/1000 Mb/s (G1/TP, G2/TP2 ports)

 2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)

 battery charging and maintenance control

 excessive discharging (UVP) protection

 battery charge current: 0,5A

(batteries 4x7Ah / 4x17Ah)

 Approximate backup time: 5h 15min

 battery output protection against short circuit

and reverse connection

 30W for each PoE port, supports devices

complaint with the IEEE802.3af/at (PoE+)

standard

 Supports auto-learning and auto-aging of MAC

addresses (16K size)

 LED indication

 Metal enclosure RACK 19” 2U

- color: black RAL 9005

 warranty – 2 year from the production date

Example of use.

CONTENTS

1. Technical description.

1.1 General description

1.2 Block diagram

1.3 Description of components and connectors

1.4 Specifications

2. Installation.

2.1 Requirements

2.2 Installation procedure

3. Indication of the device operation

4. Operation and use.

4.1 Overload or short circuit of the PSU output (SCP on)

4.2 Disconnection of discharged battery

4.3. Maintenance

Summary of content (7 pages)

PAGE 1
RSFUPS116 v1.1 RSFUPS116 16-ports switch with buffer power supply for 16 IP cameras, RACK mounted Edition: 3 from 02.07.2018 Supercedes the edition: 2 from 15.11.
PAGE 2
1. Technical description. 1.1. General description. RSFUPS116 is a 16-ports PoE in RACK 19” enclosure, switch designed for uninterrupted supply IP cameras operating in IEEE 802.3af/at standard. In case of power decay, a battery back-up is activated immediately. The approximate backup time is given assuming that all output ports are used (using typical devices and 17Ah batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were taken into account.
PAGE 3
Fig. 2. The enclosure view. 1.4 Technical parameters - parameters of the switch (tab.2) - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Table 2. Parameters of the switch Protocols, Standards Bandwidth 16 x PoE (10/100 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (SFP) with connection speed auto-negotiation and MDI/MDIX Auto Cross) IEEE 802.
PAGE 4
Table 3. Electrical parameters Mains supply Current up to Supply power The output current at the PoE (RJ45) ports Output voltage at the PoE (RJ45) ports PSU current consumption Battery charge current (batteries 4x7Ah / 4x17Ah, connect batteries in series) Approximate backup time Battery circuit protection SCP and reverse polarity connection 230V AC (-15%/+10%) / 50Hz 1,3A / 230VAC max. 219W 16 x 0,6A ΣI=4A (max.) 54V DC 250mA 0,5A max.
PAGE 5
2. Installation. 2.1. Requirements. The PSU shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V AC installations and low-voltage installations (required and necessary for a given country). The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90% maximum, without condensation) and temperature from -10°C to +45°C. The switch load balance should be done before installation.
PAGE 6
Connection schemes 3. Operation indication (see table 7) Table 7.
PAGE 7
4. Operation and use. 4.1 Overload or short circuit of the PSU output (SCP on). In case of overload, the output voltage is automatically shut off, and so is the LED indicator. The restoration of the voltage takes place immediately once the failure (overload) is over). 4.2 Disconnection of discharged battery. The PSU is equipped with the discharged battery disconnection system. During the battery-assisted operation, reducing voltage below 38V at the battery terminals will cause battery disconnection. 4.