Data Sheet

RSFUPS116R v.1.3/V
RSFUPS116R 16-port switch with buffer power supply
for 16 IP cameras and recorder, RACK mounted
CODE
TYPE
:
:
DESCRIPTION
RSFUPS116R is a 16-ports PoE in RACK 19” enclosure, switch designed for uninterrupted supply IP
cameras operating in IEEE 802.3af/at standard (54 V DC power supply) of recorder (12 V DC power supply).
In case of power decay, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 17
Ah batteries). The electricity consumption for own needs and the energy efficiency of the power intake track were
taken into account. The exact description of how to perform the calculations can be found at:
.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 16 ports of the
switch. The G1/TP, G2/TP ports is used for connection of another network device via RJ45 connector. The switch is
fitted with SFP slots; the use of fiber optic module (GBIC) allows fiber optic transmission. The LEDs at the front
panel indicate the operation status. The switch is housed in a metal enclosure RACK 19” (color: black RAL 9005).
The PoE technology ensures a network connection and reduces installation costs by eliminating the
need to supply a separate power cable for each device. This method allows supplying other network devices,
such as IP phone, wireless access point or router.
"Approximate backup
time - assumptions for calculations"
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
RSFUPS116R 16-port switch with buffer power supply
for 16 IP cameras and recorder, RACK mounted
Features:
· Uninterruptible power supply of 16 IP cameras (54 V DC)
· Uninterruptible power supply of the recorder (12 V DC)
· 16 PoE ports 10/100 Mb/s, (1÷16 ports) (data and power
supply)
· 2 ports 10/100/1000 Mb/s (G1/TP, G2/TP2 ports)
· 2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery charge current: 0,5 A
(batteries 4x7 Ah / 4x1 7 Ah)
· Approximate backup time: 4 h
· battery output protection against short
circuit and reverse connection
· 30 W for each PoE port, supports devices
complaint with the IEEE802.3af/at (PoE+)
standard
· Supports auto-learning and auto-aging of
MAC addresses (16K size)
· LED indication
· Metal enclosure RACK 19” 2U
- color: black RAL 9005
· warranty – 2 year from the production date
Pulsar
®
D
1
W
H
D
D
2
W
1