User Instructions

ManualsBrandsPulsar ManualsPoE switches RACK 19" bufferRSFUPS116R 16-port switch with buffer power supply for 16 IP cameras and recorder, RACK

RSFUPS116R

v1.3

RSFUPS116R 16-port switch with buffer power supply

for 16 IP cameras and recorder, RACK mounted

Edition: 5 from 04.02.2020

Supercedes the edition: 4 from 14.02.2019 EN

Features:

 Uninterruptible power supply of 16 IP cameras (54 V DC)

 Uninterruptible power supply of the recorder (12 V DC)

 16 PoE ports 10/100 Mb/s, (1÷16 ports) (data and power

supply)

 2 ports 10/100/1000 Mb/s (G1/TP, G2/TP2 ports)

 2 ports 10/100/1000 Mb/s SFP (G1/SFP, G2/SFP ports)

 battery charging and maintenance control

 excessive discharging (UVP) protection

 battery charge current: 0,5 A

(batteries 4x7 Ah / 4x17 Ah)

 Approximate backup time: 4 h

 battery output protection against short circuit

and reverse connection

 30 W for each PoE port, supports devices

complaint with the IEEE802.3af/at (PoE+)

standard

 Supports auto-learning and auto-aging of MAC

addresses (16K size)

 LED indication

 Metal enclosure RACK 19” 2U

- color: black RAL 9005

 warranty – 2 year from the production date

Example of use.

CONTENTS

1. Technical description.

1.1 General description

1.2 Block diagram

1.3 Description of components and connectors

1.4 Specifications

2. Installation.

2.1 Requirements

2.2 Installation procedure

3. Indication of the device operation

4. Operation and use.

4.1 Overload or short circuit of the PSU output (SCP on)

4.2 Disconnection of discharged battery

4.3. Maintenance

Summary of content (8 pages)

PAGE 1
RSFUPS116R v1.3 RSFUPS116R 16-port switch with buffer power supply for 16 IP cameras and recorder, RACK mounted Edition: 5 from 04.02.2020 Supercedes the edition: 4 from 14.02.
PAGE 2
1. Technical description. 1.1. General description. RSFUPS116R is a 16- ports PoE in RACK 19” enclosure, switch designed for uninterrupted supply IP cameras operating in IEEE 802.3af/at standard (54 V DC power supply) of recorder (12 V DC power supply). In case of power decay, a battery back-up is activated immediately. The approximate backup time is given assuming that all output ports are used (using typical devices and 17 Ah batteries).
PAGE 3
Fig. 2. The enclosure view. 1.4 Technical parameters - parameters of the switch (tab.2) - electrical parameters (tab.3) - mechanical parameters (tab.4) - operation safety (tab.5) - operating parameters (tab.6) Table 2. Parameters of the switch PoE power supply Protocols, Standards Bandwidth 16 x PoE (10/100 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (RJ-45) 2 x UPLINK (10/100/1000 Mb/s) (SFP) with connection speed auto-negotiation and MDI/MDIX Auto Cross) IEEE 802.
PAGE 4
Table 3. Electrical parameters Mains supply Current up to Supply power The output current at the PoE (RJ45) ports Output voltage at the PoE (RJ45) ports NVR output – recorder PSU current consumption Battery charge current (batteries 4x7 Ah / 4x17 Ah, connect batteries in series) Approximate backup time Battery circuit protection SCP and reverse polarity connection ~230 V; 50 Hz 1,5 A 267 W 16 x 0,6 A ΣI=4 A (max.) 54 V DC 12 V DC / 4 A (max.) 250 mA 0,5 A max.
PAGE 5
2. Installation. 2.1. Requirements. The PSU shall be mounted by a qualified installer with appropriate permissions and qualifications for 230 V installations and low-voltage installations (required and necessary for a given country). The unit should be mounted in confined spaces, in accordance with the 2nd environmental class, with normal relative humidity (RH=90 % maximum, without condensation) and temperature from -10 °C to +45 °C. The switch load balance should be done before installation.
PAGE 6
Connection schemes 3. Operation indication (see table 7.) Table 7.
PAGE 7
4. Operation and use. 4.1 Overload or short circuit of the PSU output (SCP on). In case of overload, the output voltage is automatically shut off, and so is the LED indicator. The restoration of the voltage takes place immediately once the failure (overload) is over). 4.2 Disconnection of discharged battery. The PSU is equipped with the discharged battery disconnection system. During the battery-assisted operation, reducing voltage below 38 V at the battery terminals will cause battery disconnection. 4.
PAGE 8
WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law. Pulsar sp. j. Siedlec 150, 32-744 Łapczyca, Poland Tel. (+48) 14-610-19-40, Fax.