User Instructions

ManualsBrandsPulsar ManualsEquipment for IP cameras (PoE)RSUPS108R 10-port switch with buffer power supply for 8 IP cameras and recorder, RACK

RSUPS108R

v.1.0

RSUPS108R 10-ports switch with buffer power supply

for 8 IP cameras IP and recorder, RACK mounted

Edition: 1 from 23.03.2018

Supercedes the edition: -----------

Summary of content (10 pages)

PAGE 1
RSUPS108R v.1.0 RSUPS108R 10-ports switch with buffer power supply for 8 IP cameras IP and recorder, RACK mounted EN Edition: 1 from 23.03.
PAGE 2
www.pulsar.pl RACK POWER RSUPS108R Features:           DC 52V uninterruptible power supply of 8 IP cameras DC 12V uninterruptible power supply of the recorder Switch 10 ports: 8 PoE ports 10/100Mb/s, (1÷8 ports) (data transfer and power supply) 2 10/100Mb/s ports (UpLink) 30W for each PoE port, supports devices complaint with the IEEE802.
PAGE 3
www.pulsar.pl RSUPS108R RACK POWER 1. Technical description. 1.1. General description. The RSUPS108R is a complete solution for power supply and battery backup of 8 IP cameras (52VDC power supply) and uninterruptible power supply of the DVR (12VDC power supply) in RACK 19" standard.
PAGE 4
www.pulsar.pl RSUPS108R RACK POWER Fig.2. The view of the switch. Table 2. (See Fig. 3 and 4) Element no. [Fig.
PAGE 5
www.pulsar.pl RSUPS108R RACK POWER Fig.5. The view of the PSU. 1.4. Specifications. - parameters of the switch (tab.3) - electrical parameters (tab.4) - mechanical parameters (tab.5) - operation safety (tab.6) - operating parameters (tab.7) Parameters of the switch (tab. 3). Ports PoE power supply Protocols, Standards Forwarding rate Bandwidth Transmission method 10 10/100Mb/s ports (8 x PoE + 2 x UP LINK) with connection speed auto-negotiation and MDI/MDIX Auto Cross) IEEE 802.
PAGE 6
www.pulsar.pl RACK POWER RSUPS108R Electrical parameters (tab. 4).
PAGE 7
www.pulsar.pl RACK POWER RSUPS108R Operating parameters (tab.7). Environmental class Operating temperature Storage temperature Relative humidity Vibrations during operation Impulse waves during operation Direct insulation Vibrations and impulse waves during transport II -10ºC...+40ºC -20ºC...+60ºC 20%...90%, without condensation unacceptable unacceptable unacceptable According to PN-83/T-42106 2. Installation. 2.1. Requirements.
PAGE 8
www.pulsar.pl RSUPS108R RACK POWER 3. Indication of the device operation. 3.1. LED indication of operating status.
PAGE 9
www.pulsar.pl RSUPS108R RACK POWER 3.3. Technical output. The power supply is fitted with the ALARM output of collective failure (relay type). A collective failure can be triggered by the following events: - 230V AC mains power failure - Failure of the switch mode power supply - No voltage at the power supply output of the recorder - Too high temperature of the switch mode power supply (>70°C) - Low battery voltage (<23V) Fig. 5. Electrical diagram of the ALARM collective output of failure.
PAGE 10
www.pulsar.pl RSUPS108R RACK POWER WEEE LABEL Waste electrical and electronic equipment must not be disposed of with normal household waste. According to the European Union WEEE Directive, waste electrical and electronic equipment should be disposed of separately from normal household waste. The power supply unit is adapted for a sealed lead-acid battery (SLA). After the operation period it must not be disposed of but recycled according to the applicable law.