User Instructions

ManualsBrandsPulsar ManualsEquipment for HD camerasRUPS 13,8V/12V/20A/PTC RACK mounted buffer power supply for up to 16 cameras and recorder

RUPS1612RP

v.1.0

RUPS 13,8V/12V/20A/PTC

RACK mounted buffer power supply for up to 16 cameras and

recorder.

Edition: 3 from 15.11.2017

Supercedes the edition: 2 from 30.03.2017

Summary of content (8 pages)

PAGE 1
RUPS1612RP v.1.0 RUPS 13,8V/12V/20A/PTC RACK mounted buffer power supply for up to 16 cameras and recorder. EN Edition: 3 from 15.11.2017 Supercedes the edition: 2 from 30.03.
PAGE 2
www.pulsar.pl RUPS1612RP RACK POWER CCTV Features:              DC 13,8V/16x0,75A uninterruptible power supply for powering HD cameras (12A max.
PAGE 3
www.pulsar.pl RUPS1612RP RACK POWER CCTV 1. Technical description. 1.1. General description. The RUPS1612RP buffer power supply unit is designed for uninterrupted power supply of up to 16 HD cameras requiring stabilized voltage of 12V DC (+/- 15%). The PSU has two circuits: 1x4A / 12V DC for supplying the recorder and 16x0,75A / 13,8V DC for both cameras. Current efficiency of the PSU amounts to: Output current 16x0,75A + 4A recorder + 2A battery charge Total device current + battery: 18A max.
PAGE 4
www.pulsar.pl RUPS1612RP RACK POWER CCTV BUZZER, micro switch, turning ON / OFF of acoustic indication switch in the top position, indication ON switch in the down position, indication OFF FDVR, glass fuses in the recorder DVR (+) power supply circuits, F4A 230V AC INPUT, power socket 230V AC, power cable 1,5m included FMAINS, fuse in the supply circuit 230V AC, T 6,3A/250V Fig. 2. The front power of the power supply unit. Fig.3. The view of the PSU. 1.4. Specifications. - electrical parameters (tab.
PAGE 5
www.pulsar.
PAGE 6
www.pulsar.pl RUPS1612RP RACK POWER CCTV 2. Installation. 2.1. Requirements. The PSU RACK shall be mounted by a qualified installer with appropriate permissions and qualifications for 230V AC installations and low-voltage installations (required and necessary for a given country). The device shall be mounted in confined spaces, according to the environment class II, with normal air humidity (RH=90% max. without condensation) and the temperature from -10°C do +45°C.
PAGE 7
www.pulsar.pl RUPS1612RP RACK POWER CCTV 3. Operating status indication. 3.1. LED indication.
PAGE 8
www.pulsar.pl RUPS1612RP RACK POWER CCTV 3.3. Acoustic indication. A collective failure is indicated by the piezoelectric indicator, 1 beep every second. The acoustic indication can be turned off by changing the ON / OFF position of the switch . switch in the up position, indication ON switch in the down position, indication OFF 4. Operation and use. 4.1. Overload or short circuit of the PSU output. The AUX1 ÷ AUX16 power supply outputs are protected against by polymer fuses PTC.