Data Sheet

RUPS1612RT
v.1.0/III
RUPS 13,8V/12V/20A/TOPIC mounted buffer power supply
for up to 16 cameras and recorder.
CODE:
TYPE:
DESCRIPTION
The RUPS1612RT buffer power supply unit is designed for uninterrupted power supply of up to 16 HD
cameras requiring stabilized voltage of 12V DC (+/- 15%). The PSU has two circuits: 1x4A / 12V DC for supplying
the recorder and 16x0,75A / 13,8V DC for both cameras.
Current efficiency of the PSU amounts to:
Output current 16x0,75A + 4A recorder + 2A battery charge
Total device current + battery: 18A max.
In case of power decay, a battery back-up is activated immediately.
The approximate backup time is given assuming that all output ports are used (using typical devices and 65Ah
batteria). The electricity consumption for own needs and the energy efficiency of the power intake track were taken
into account. The exact description of how to perform the calculations can be found at:
.
The PSU is fitted with 16 outputs protected independently with glass fuse 1A and the output for the recorder is
protected with the 4A glass fuse. The power supply is fitted with the ALARM output of collective failure. In case of
failure, relay contacts are switched automatically, which is accompanied by acoustic and optical indication (the
corresponding led goes on). The power supply construction is based on the switch mode PSU with high energy
efficiency and is located in an enclosure adapted for mounting in standard RACK 19” cabinets.
"Approximate backup time -
assumptions for calculations"
EN*
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
RACK POWER CCTV series power supply unit
RACK mounted buffer power supply for up to 16 cameras and recorder
Features:
· DC 13,8V/16x0,75A uninterruptible power supply
for powering HD cameras (S I =12A max.)
· DC 12V/4A uninterruptible power supply of the
recorder
· 16 outputs to cameras independently protected
with 1A glass fuses
· the output for the recorder is protected with the 4A
glass fuse
· wide range of mains supply AC: 176÷264V AC
· high efficiency 82%
· battery charging and maintenance control
· excessive discharging (UVP) protection
· battery output protection against short circuit and
reverse connection
· battery charge current: 2A
(batteries 1x17Ah / 1x28Ah / 1x40A / 1x65Ah)
· control of voltage presence at the
AUX1 ÷ AUX16 outputs DVR
· Approximate backup time: 4h 30min
· acoustic indication of failure
· LED optical indication: AC, DC, TEMP, LoB, ALARM,
AUX1 ÷ AUX16, DVR
· the ALARM technical output of collective failure –relay
type, activated by:
· 230V AC power loss
· low voltage of the PSU (<11,5V)
· activation of the output fuse in the camera power
supply circuit
· activation of the output fuse in the recorder
power supply circuit
· too high temperature of the PSU (>70°C)
· the PSU failure
· protections:
· SCP short-circuit protection
· OVP overvoltage protection
· overvoltage protection
· overload protection OLP
· forced cooling (fan)
· warranty – 2 year from the production date
D
1
W
H
D
D
2
W
1