Data Sheet

SF116 v.1.2/IV
F 16 6 16S 1 1 -port switch for IP cameras
CODE
TYPE
:
:
DESCRIPTION
SF116 is a 16-ports PoE switch designed to supply IP cameras operating in IEEE 802.3af/at standard.
Automatic detection of any devices powered in the PoE/PoE+ standard is enabled at the 1 – 8 ports of the switch. The G1/TP
and G2/TP ports is used for connection of another network device via RJ45 connector. The switch is fitted with SFP slots
(marked as G1/SFP and G2/SFP), the use of fiber optic module (GBIC) allows fiber optic transmission.The operating status
of the device (described in the table below) is displayed on the LED display on the front panel.
The PoE technology ensures a network connection and reduces installation costs by eliminating the need to
supply a separate power cable for each device. This method allows supplying other network devices, such as IP phone,
wireless access point or router.
EN**
wyjście TAMPER : przewody 30cm
Tel. [phone], fax: [phone], www.pulsar.pl, e-mail: [e-mail]
SF116 16-port switch for 16 IP cameras
Ports
16 x PoE (10/100Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (RJ-45)
2 x UPLINK (10/100/1000Mb/s) (SFP)
with connection speed auto-negotiation and MDI/MDIX Auto Cross)
PoE power supply
IEEE 802.3af/at (1÷16 ports), 52 V DC / 30 W at each port *
Used pairs 1/2 (+), 3/6 (-)
Protocols, Standards
IEEE802.3, 802.3u, 802.3x CSMA/CD, TCP/IP
Bandwidth
14,8Gbps
Transmission method
Store-and-Forward
Optical indication of
operation
Switch power supply
Link
PoE Status
Power supply
~100-240 V; 50/60 Hz; 3 A
Operating conditions
temperature -10°C ÷ 40°C,
relative humidity 20% - 90%, no condensation
Dimensions
W=442, H=44, D=224 [+/- 2mm]
Additional equipment
bracket for Rack 19”
Cable length AC
1,2m
Net/gross weight
2,7 / 3,1kg
Protection class
EN 60950-1:2007
I (first)
Storage temperatur
-20°C ÷ 60°C
Declarations, warranty
CE, 2 year from the production date
Features:
· Switch 16 ports
16 PoE ports 10/100Mb/s (data transfer
and power supply)
2 ports 10/100/1000 Mb/s (ports G1/TP, G2/TP) (UpLink)
2 ports 10/100/1000Mb/s SFP (G1/SFP, G2/SFP ports)
(UpLink)
· 30 W for each PoE port, supports devices complaint with the
IEEE802.3af/at (PoE+) standard
· Supports auto-learning and auto-aging of MAC addresses
(16K size)
· LED indication
· Additional assembly elements
· warranty – 2 year from the
production date
TECHNICAL PARAMETERS
Pulsar
®
* The given value of 30 W per port is the maximum value. The total power consumption should not exceed 160 W.
W
H
D