Operation Manual

11
● We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
● Necessary procedure after battery change
After the battery is replaced with a new one, or in case any of the hands should move
improperly, follow the procedure below to reset the hands to “0” position.
A
and
B
Press and hold at the
same time for 2
seconds.
*
Pull out to second click.
CROWN
A
▲
▲
A
or
B
Press repeatedly to reset
CHRONOGRAPH
second and minute
hands to “0” position.
**
CROWN Turn to set the time.
CROWN
Push back in to normal
position.
▲
▲
* The CHRONOGRAPH second
hand turns half a circle counter-
clockwise and then returns where
it was.
** The hands turn counterclockwise
by pressing button “A” and clock-
wise by pressing button “B”. The
hands move quickly if the respective
buttons are kept pressed.
B