Operation Manual

• If any of the chronograph hands do not return to the “0” position
when the chronograph is reset, follow the procedure below to
reset the hands.
ADJUSTING THE CHRONOGRAPH HAND POSITION
Before setting the time, be sure to check if the chronograph
hands are in the “0” position when the chronograph is reset.
Note: The “0” position of the chronograph 1/10 second hand
differs depending on the models.
* Some models have the “0” position of the chronograph
1/10 second hand at 3 and 9 o’clock sides of the small
dial. In that case, check if the hand is level with its both
ends pointing to those “0” positions.
* If the chronograph is in use, press the buttons in the following
order to reset it, and then check if the hands return to the “0”
position. (For details, refer to “CHRONOGRAPH”.)
• If the chronograph is counting : A → B
• If the chronograph is stopped : B
• If the split time is displayed : B → A → B
Chronograph 1/10-
second hand
A
[Cal. V657]
(a) Normal position : Free
(b) First click : Date setting
(c) Second click :
• Setting the hour and minute hands.
• Activating the chronograph hand position adjusting function.
Crown operation
Chronograph second hand
B
Date
Crown
a b c
Minute hand
Second hand
Chronograph
minute hand
Hour hand