Operation Manual

English
English
1110
5
60
5
10
15
20
25
30
35
40
45
50
55
SEC.
60
5
10
15
20
25
30
35
40
45
50
55
MIN.
BATTERY CHANGE
Battery life : Approx. 2 years
Battery : SEIKO SR920SW
2
Years
l
If the stopwatch is used for more than 60 minutes a day, the battery life may be less
than the specified period.
l
As the battery is inserted at the factory to check the function and performance of
the watch, its actual life once in your possession may be less than the specified
period.
l
When the battery expires, be sure to replace it as soon as possible to prevent any
malfunction.
l
We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
l
After the battery is replaced with a new one, adjust the stopwatch hand position and
set the time.
l
Necessary procedure after battery change
AND
Press and hold simultaneously
for 2 seconds or longer.
Press to reset the position of
the STOPWATCH second hand
to the "0" position.
After the battery is replaced with a new one, or in case any of the hands should move
improperly, follow the procedure below to reset the hands to the “0” position.
The STOPWATCH second hand
turns half a circle counterclockwise,
and then returns to where it was.
s
Turn to set the hour and minute
hands to the desired time.
Push back in to normal position.
s
Pull out to the second click.
s
The STOPWATCH minute hand
moves correspondingly with the
STOPWATCH second hand.
The hands move quickly if the
resp ective buttons are kept
pressed.
B
A
CROWN
A
s
Press to reset the position of
the STOPWATCH minute hands
to the "0" position.
B
CROWN
CROWN
s
NPWA64_E.indd 10-11 13/01/25 13:53