Operation Manual

English
6
DAY AND TIME SETTING
● To advance the day hand quickly, turn back the hour and minute hands 4 to 5 hours
beyond the point the day normally changes, and then advance them again until the day
hand is set to the next.
NOTES ON OPERATING THE WATCH
DATE SETTING
● Do not set the date between 10:00 p.m. and 1:00 a.m. Otherwise, it may not turn
properly.
● While setting the date hand, check that it moves properly in one-day increments.
● It is necessary to adjust the date on the first day after a 30-day month and February.
● When adjusting the day hand, turn the crown slowly.
● When the time is set, the 24-hour hand (or 24-hour rotating wheel) moves correspondingly
with the hour and minute hands.
● When setting the hour hand, check that the 24-hour hand is correctly set.
● When setting the minute hand, advance it 4 to 5 minute ahead of the desired time and
then turn it back to the exact minute.
* The day hand will not move back by turning the crown counterclockwise.
● The 24-hour hand (or 24-hour rotating wheel) turns full circle in one day.