Operation Manual

NOTES ON USING THE WATCH

TIME/CALENDAR MODE

[TIME/CALENDAR SETTING]

● The calendar automatically adjusts for odd and even months including February of leap

years from 1998 to 2048.

● Once the year, month and date have been set, the day of the week is automatically set.

● Setting the seconds:

• With the second digits flashing, press button D in accordance with a time signal. The

second digits are reset to “00”.

• When the seconds count any number from “30” to “59” and button D is pressed, one

minute is added and the seconds are reset to “00”.

● The flashing digits except the seconds and 12-/24-hour indication move quickly if button

D is kept pressed.

● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.

Only the “PM” mark is displayed. For the AM setting, there is no indication. In the 24-

hour indication, “24” is displayed.

● If the watch is left untouched with the digits flashing, it will automatically return to the

TIME/CALENDAR mode in 1 to 2 minutes.

● Note on unusual display:

While setting the time/calendar, all the segments of the display will light up if both

buttons C and D are pressed at the same time. This is not a malfunction. Press button

A, B, C or D to return to the TIME/CALENDAR mode, and then set the time/calendar

again.