Operation Manual

17
BATTERY CHANGE
Battery life : Approx. 2 years
Battery : SEIKO CR1620
2
Years
● The battery life may be less than 2 years if the alarm is used for more than 10 seconds
a day and/or the illuminating light more than once a day.
● As the battery is inserted at the factory to check the function and performance of the
watch, its actual life once in your possession may be less than the specified period.
● When the battery expires, be sure to replace it as soon as possible to prevent any
malfunction.
● We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
● Necessary procedure after battery change
After the battery is replaced with a new one or if an abnormal display (broken digits, etc.)
appears, follow the procedure below to reset the IC.
Press and hold buttons A, B, C and D at the same time for 2 to 3 seconds. The
display will become blank, and “12:00'00", Jan. 1st, 1998, TH” will be displayed
when the buttons are released.
* Before using the watch, set the time/calendar and then, the alarm.