Operation Manual

HOW TO SET THE ALARM

Hour

1. Selection of the digits to be adjusted

is made alternately between the hour

and the minute digits by each depression

of button “B”.

2. One digit (flashing) is advanced by

each depression of button “C”. The

digits are advanced quickly by keeping

button “C” depressed. (Be sure to

check that “A”(AM)/“P”(PM) is correctly

set.)

3. After all adjustments are completed,

depress button “A” to return to the

time/calendar display.

Depress button “A” to show the alarm display, and then depress

button “B” to activate the setting function. The hour digits and

“A”(AM)/“P”(PM) mark start flashing.

*When the time/calendar function is displayed in the 24-hour

indication, the alarm function will also be displayed in the 24-

hour indication.

How to engage and disengage the alarm and hourly time signal

Time signal mark

Alarm mark

* The alarm rings at the designated time for 20 seconds and

stops. However, it can be stopped manually by depressing any

one of buttons “A”, “B” and “C”.

** The alarm sound can be tested by depressing buttons “B” and

“C” at the same time in the time/calendar display.

Alarm Time signal

Engaged

Disengaged

Engaged Disengaged

Disengaged Engaged

In the time/calendar display depress

buttons “B” and “C” at the same time,

and the engagement and disengagement

of the alarm and the time signal rotate

in the following order:

A/P mark

Minute