Operation Manual

HOW TO SET THE TIME/CALENDAR ** If the watch is left untouched in the time/calendar setting

function, it will automatically return to the time/calendar display

in 1 ~ 2 minutes.

* When the seconds show any number from “30” to “59” and

button “C” is depressed in the second setting mode, the seconds

are reset to “00” with one minute added.

2. One digit (flashing) is advanced by

each depression of button “C”. The

digits except seconds are advanced

quickly by keeping button “C” depressed.

(The seconds are reset to “00” when

button “C” is depress-ed.)

3. After all adjustments are completed,

depress button “A” to return to the

time/calendar display.

1. Selection of the digits to be adjusted

is made in the following order by

depressing button “B”.

Second Minute Hour

Day Date Month

Depress button “A” to show the time/calendar setting function.

The second digits start flashing.

* When the display is set in the 12-hour indication, be sure to

check that AM/PM is correctly set.

** When the time/calendar function is displayed in the 24-hour

indication, the alarm will also be displayed in the 24-hour

indication.

In the time/calendar display, each depression of button “B” for 1

to 2 seconds changes the display as shown above between the 12-

hour and 24-hour indications.

Changeover between 12-hour and 24-hour indications

12-hour indication 24-hour indication

Month

Day

Date

Hour

Minute

Second