Operation Manual

12
● If the watch is left untouched in the SINGLE-TIME ALARM mode, it will automatically
return to the TIME/CALENDAR mode in 2 to 3 minutes.
● The single-time alarm rings differently from the regular alarm.
REGULAR ALARM MODE
● If the watch is left untouched in the REGULAR ALARM mode, it will automatically return
to the TIME/CALENDAR mode in 2 to 3 minutes.
[REGULAR ALARM SETTING]
● With each press of button C or D, one minute is advanced or moved back, respectively.
The digits move quickly if the respective buttons are kept pressed.
● While the digits are advanced or moved back quickly by keeping button “C” or “D”
pressed, respectively, they start moving in 15-minute increments once they reach “00”,
“15”, “30” or “45”. Release the buttons as the digits nearest to the minutes you wish
to set are shown, and set them in 1-minute increments by pressing button “C” or “D”
repeatedly.
● If the watch is left untouched with the digits flashing, it will automatically return to the
REGULAR ALARM mode in 1 to 2 minutes.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
Only the “PM” mark is displayed. For the AM setting, there is no indication.
● Regular alarm test: The regular alarm can be tested by keeping button C pressed in
the REGULAR ALARM mode. After the alarm is tested, press
button C to engage/disengage the regular alarm/hourly time
signal as desired.