CAL.
MODE CHANGE C A A With each press, the mode changes in the following order: ➡ MEMO ➡ WORLD TIME ➡ REGULAR ALARM ➡ TIME/ CALENDAR C 2 Press in TIME/CALENDAR mode to show SINGLE-TIME ALARM mode.
TIME/CALENDAR MODE ● Once the time/calendar of your area is set in the TIME/CALENDAR mode, the times of the 24 cities covered in the WORLD TIME mode will be set automatically. * To display the times of the cities covered in the WORLD TIME mode properly, it is necessary to select the city representing your area and set the correct time in the TIME/CALENDAR mode. ● The contrast on the liquid crystal display can be adjusted in 16 steps. A Press to show TIME/CALENDAR mode.
TIME/CALENDAR SETTING A ▲ ▲ E Press for 2 to 3 seconds to show TIME/CALENDAR SETTING display. or F Press to select the digits to be adjusted. Selection of the digits Year Month ↔ Day ↔ ↔ ↔ City ↔ ↔ ↔ Contrast level Hour Date Set the flashing digits. (Increasing digits) ▲ or D Set the flashing digits. (Decreasing digits) ▲ A 4 Return to TIME/CALENDAR mode.
CHANGEOVER BETWEEN TWO TIME DISPLAY SYSTEMS E F or With each press in TIME/CALENDAR mode, the time indication in the lower row of the display changes alternately between “HOUR, MINUTES and SECONDS” and “HOUR and MINUTES”. ➡ ➡ F E DEMONSTRATION FUNCTION D Press in TIME/CALENDAR mode to start the demonstration. * The watch shows the displays in each mode. * To stop the demonstration, press button A, C, D, E or F.
MEMO MODE ● A memo of up to 40 characters can be stored in each of the 8 memo channels. A Press to show MEMO mode. C Memo channel No. Memo D A F 6 C or D E Press to select the desired memo channel.
SCROLL DISPLAY OF MEMOS ● If the memo stored in a memo channel has more than 6 characters, the display scrolls to show the rest of the characters. ● The display scrolls to show 5 characters at a time. The scrolling display can be stopped or moved back as desired. C or D Press to select the desired memo channel. ▲ F With each press, the next 5 characters are shown. or E With each press, the previous 5 characters are shown.
HOW TO INPUT THE MEMO C or D Press to select the desired memo channel. ▲ A Press for 2 to 3 seconds to show MEMO INPUT display. ▲ C With each press, the flashing character changes in order. ▲ or D With each press, the flashing character changes in reverse order. ▲ E When the desired character is shown, press to register it. * The flashing position moves rightward for the input of the next character. or F ▲ 8 When the desired character is shown, press to register it.
* To correct the characters already registered, press button E or F to move the flashing position so that the character you wish to correct flashes. Then, press button C or D to show the desired character, and press button E or F to register it. HOW TO ERASE A MEMO C or D Press to select the desired memo channel. ▲ A Press for 2 to 3 seconds to show MEMO INPUT display. ▲ C and D Press at the same time for 2 to 3 seconds.
WORLD TIME MODE ● The time of 24 cities in different time zones throughout the world can be displayed. ● Daylight saving time can be set for each city. A Press to show WORLD TIME mode. C City mark Current time of selected city D A F 10 E or F E Press to select the desired city.
CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME A Press for 2 to 3 seconds. With each press, the standard time and daylight saving time of the selected city are alternately shown.
TIME DIFFERENCES GMT = Greenwich Mean Time City mark LON PAR ROM BER IST MOW DXB KHI DAC BKK BJS TYO City name London* Paris* Rome* Berlin* Istanbul* Moscow* Dubai Karachi Dhaka Bangkok Beijing Tokyo (As of April 2000) GMT ± (hours) City mark ±0 +1 +1 +1 +2 +3 +4 +5 +6 +7 +8 +9 SYD NOU WLG HNL ANC LAX DEN CHI NYC CCS RIO PDL City name Sydney* Noumea Wellington* Honolulu Anchorage* Los Angeles* Denver* Chicago* New York* Caracas Rio de Janeiro* Azores Is.
REGULAR ALARM MODE ● The regular alarm can be set to ring on a 24-hour basis. A Press to show REGULAR ALARM mode.
REGULAR ALARM SETTING A ▲ ▲ E Press for 2 to 3 seconds to show REGULAR ALARM SETTING display. or F Press to select the digits to be adjusted (hour/minutes). ▲ C Set the flashing digits. (Increasing digits) or D Set the flashing digits. (Decreasing digits) ▲ A Return to REGULAR ALARM mode. * “ON” and the alarm mark are automatically displayed and the regular alarm is engaged.
ENGAGEMENT/DISENGAGEMENT OF REGULAR ALARM AND HOURLY TIME SIGNAL Hourly time signal mark Regular alarm mark C C With each press, the engagement and disengagement of the regular alarm and hourly time signal are made as follows: ▲ Both engaged ▲ Regular alarm engaged ▲ Neither engaged ▲ Hourly time signal engaged * At the designated time, the regular alarm rings for 20 seconds. To stop it manually, press any of the buttons.
SINGLE-TIME ALARM MODE ● The single-time alarm can be set to ring only once at the designated time. As it rings, it is automatically disengaged. ● The single-time alarm can be set in minute increments starting from the current time. C Press in TIME/CALENDAR mode to show SINGLE-TIME ALARM mode.
SINGLE-TIME ALARM SETTING C Press to set the desired alarm time. (Increasing digits) or D Press to set the desired alarm time. (Decreasing digits) ▲ A Return to TIME/CALENDAR mode. * The single-time alarm mark “1-AL” remains displayed to indicate that the single-time alarm has been set. Single-time alarm mark * At the designated time, the single-time alarm rings for 20 seconds. To stop it manually, press any of the buttons.
ILLUMINATING LIGHT (Electroluminescent panel) B B Turn on the illuminating light. * The display panel is evenly illuminated for 3 seconds. ViViDiGi ● is a new type of liquid crystal panel that makes possible various colors and high contrast. ● Excellent light reflection and transmission make the display bright and clear. ● Various color options are available. ● Either the whole panel or the displayed data only can be illuminated. 18 * Features vary in different models.
NOTES ON USING THE WATCH MODE CHANGE ● The design of the liquid crystal panel differs depending on the model. ● When the mode is changed over, the display of the selected mode scrolls from right to left. TIME/CALENDAR MODE [TIME/CALENDAR SETTING] ● The calendar automatically adjusts for odd and even months including February of leap years from 2000 to 2050. ● Setting the seconds: • With the second digits flashing, press button C or D in accordance with a time signal. The second digits are reset to “00”.
of button C or D while the hour and minute digits are flashing. In the 12-hour indication, only “PM” mark is displayed and there is no indication for the AM setting. In the 24hour indication, “24H” is displayed. ● The flashing digits except the seconds and 12-/24-hour indication move quickly if button C or D is kept pressed. ● If the watch is left untouched with the digits flashing, it will automatically return to the TIME/CALENDAR mode in 1 to 2 minutes.
WORLD TIME MODE ● To display the times of the cities covered in the WORLD TIME mode properly, it is necessary to select the city representing your area and set the correct time in the TIME/ CALENDAR mode. [CHANGEOVER BETWEEN STANDARD TIME AND DAYLIGHT SAVING TIME] ● When the daylight saving time is set for the city selected in the TIME/CALENDAR mode, the current time is advanced by one hour. When the standard time is set, the current time is moved back by one hour.
SINGLE-TIME ALARM MODE ● When button C or D is pressed to set the single-time alarm, the single-time alarm mark “1-AL” is displayed and the single-time alarm is automatically engaged. ● If the watch is left untouched in the SINGLE-TIME ALARM mode, it will automatically return to the TIME/CALENDAR mode in 1 to 2 minutes. ● The single-time alarm rings differently from the regular alarm.
BATTERY CHANGE 2 Years Battery life : Approx. 2 years Battery : SEIKO CR2025 ● The battery life may be less than 2 years if the alarm is used for more than 10 seconds a day, the timer warning sound for more than 10 seconds a day and/or the illuminating light more than once a day. ● As the battery is inserted at the factory to check the function and performance of the watch, its actual life once in your possession may be less than the specified period.
level, and hour and minute display in the TIME/CALENDAR mode” when the buttons are released. * Before using the watch, set the time/calendar and alarms. WARNING ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children. If a child swallows it, consult a doctor immediately. ● Never short-circuit, tamper with or heat the battery, and never expose it to fire. The battery may burst, become very hot or catch fire.
TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Non-water resistant • If the watch becomes wet, have it checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR • Do not operate the buttons when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
* Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a PULSAR Diver’s Watch for scuba diving. TEMPERATURES Your watch works +50°C with stable accuracy within a temperature -5°C range of 5° C and 35° C (41° F and 95° F).
SHOCKS & VIBRATION PERIODIC CHECK Light activities will not It is recommended that the affect your watch, but be watch be checked once 2-3 careful not to drop your every 2 to 3 years. Have Years watch or hit it against hard your watch checked by an surfaces, as this may AUTHORIZED PULSAR cause damage. DEALER or SERVICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact.
STATIC ELECTRICITY The IC (Integrated Circuit) used in your watch will be affected by static electricity which may disturb the display. Keep the watch away from close contact with objects such as TV screens which emit strong static electricity. 28 LIQUID CRYSTAL PANEL The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. 5 Years After that it may decrease in contrast, becoming difficult to read.
