Operation Manual

14
B or C is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
TIME/CALENDAR mode in 1 to 2 minutes.
● Note on unusual display:
While setting the time/calendar, all the segments of the display will light up if both
buttons B and C are pressed at the same time. This is not a malfunction. Press button
A, B or C to return to the TIME/CALENDAR mode, and then set the time/calendar again.
[SHOWING CALENDAR DISPLAYS]
● When button B is pressed to change over the display, the selected display scrolls from
right to left.
● If the watch is left untouched with the month and date or the day of the week displayed,
it will automatically return to the time display in 1 to 2 minutes.
[MEMO DEMONSTRATION]
● If no memo is registered in the memo channel No. 1, the following display scrolls.
▲
▲
MEMO MODE
● A memo is displayed with “ ” at its beginning and “ ” at its end.
[HOW TO INPUT THE MEMO]
● If the watch is left untouched with the digits flashing, it will automatically return to the