Operation Manual

16
BATTERY CHANGE
Battery life : Approx. 2 years
Battery : SEIKO SR1120SW
2
Years
● As the battery is inserted at the factory to check the function and performance of the
watch, its actual life once in your possession may be less than the specified period.
● When the battery expires, be sure to replace it as soon as possible to prevent any
malfunction.
● We recommend that you contact an AUTHORIZED PULSAR DEALER for battery
replacement.
● Necessary procedure after battery change
After the battery is replaced with a new one or if an abnormal display (broken digits, etc.)
appears, follow the procedure below to reset the IC.
Press and hold buttons A, B and C at the same time for 2 to 3 seconds. The display
will become blank, and the watch will return to the initial setting of “12:00'00" a.m.,
January 1st, 2000, SAT (Saturday), LON (London)” when the buttons are released.
* Before using the watch, set the time/calendar.
* Please note that all the memos registered in the memo channels will be erased after
the IC is reset.