Operation Manual

8
* To correct the characters already registered, follow the procedure below.
1) Press button A for 1 to 2 seconds to return to the MEMO mode.
2) Press button A for 1 to 2 seconds to show the MEMO INPUT display.
3) Press button A to move the flashing position so that the character you wish to
correct flashes.
4) Press button B or C to show the desired character, and press button A to register
it.
HOW TO ERASE A MEMO
Press to select the desired memo channel.
B
▲
Press for 1 to 2 seconds to show MEMO INPUT display.
A
▲
Press at the same time for 3 to 4 seconds.
B
and
C
* The display flashes and then, the
display shown at right appears and
scrolls once to indicate that the
selected memo is erased.