Operation Manual

44
Cal. W671Cal. W626
4) If the timer is left counting without being stopped, it will automatically be stopped
and reset to show the set time when more than 12 hours passed and the time
display reaches 0:00 a.m. or 0:00 p.m.
ALARM MODE
● At the designated time the alarm rings for 20 seconds, and the display is illuminated as
the alarm rings. To stop them manually, press any one of the buttons.
● In the alarm time setting, the flashing digits move quickly if button D is kept pressed.
● When the time function is displayed in the 24-hour indication, the alarm is also displayed
in the 24-hour indication.
● When setting the hour digits in the 12-hour indication, check that AM/PM is properly set.
● If the watch is left untouched with the digits flashing, it will automatically return to the
ALARM mode in 2 to 3 minutes.
● Alarm test: The alarm can be tested by keeping buttons C and D pressed in the TIME/
CALENDAR mode.
● When the hourly time signal mark is displayed, the hourly time signal rings every hour
on the hour and the confirmation sound beeps with each press of the buttons.