CAL. W626, W671 DIGITAL QUARTZ ● Time/calendar ● Stopwatch ● Countdown timer with preset and adjustable timer functions ● Daily alarm ● Auto illumination function (Cal.
Cal. W626 MODE CHANGE ○ ○ ○ ○ ○ ○ ○ ○ ○ ▲ ○ ○ ○ TIME/ CALENDAR mode ○ STOPWATCH mode ○ ○ ○ ○ ▲ ○ A ○ ▲ With each press, 22 ▲ the mode changes in order.
Cal. W626 TIME/CALENDAR MODE Date Month Day ➡ ➡ D TIME display CALENDAR display SHOWING THE CALENDAR DISPLAY D Press to show CALENDAR display. * Month, date and day are displayed for 5 seconds, and then, the watch automatically returns to the TIME display.
Cal. W626 TIME/CALENDAR SETTING B C Press for 2 to 3 seconds. ▲ B ▲ C Select the digits to be adjusted. ▲ D Set the flashing digits. ▲ D B Return to TIME/CALENDAR mode.
Cal. W626 STOPWATCH MODE ● The stopwatch measures up to 100 hours in 1/100 second increments for the first 1 hour and in 1 second increments thereafter. Split time measurement SPLIT RELEASE C STOP ▲ SPLIT D ▲ D ▲ START ▲ C C Start / Stop / Restart D Reset / Split / Split release * Measurement and release of split time can be repeated by RESET pressing button D.
Cal.
Cal. W626 TIMER MODE ● Two types of timer are available: preset timer and adjustable timer. ● The adjustable timer can be set up to 60 minutes in minute increments. PRESET TIMER SETTING D Select the preset time. Selection of the preset time 3 min. ➾ 5 min. ➾ 10 min. ➾ ➾ C ➾ 30 min. 15 min. ADJUSTABLE TIMER SETTING B Press for 2 to 3 seconds. ▲ D ▲ D 45 min. ➾ 60 min. ➾ B Set the flashing digits.
Cal. W626 B Return to TIMER mode. TIMER OPERATION B C Start / Stop / Restart D Reset * When the set time is up, a warning sound beeps for 5 seconds. To stop it manually, press any one of the buttons.
Cal. W626 ALARM MODE ALARM SETTING B C ▲ Select the digits to be adjusted (hour/minutes). D Set the flashing digits. ▲ D Press for 2 to 3 seconds. ▲ C ▲ B B Return to ALARM mode. * The alarm is automatically engaged.
Cal. W626 Alarm engagement/disengagement Alarm engaged C With each press, the alarm is engaged and disengaged alternately. Alarm mark “on” mark Turning on/off of hourly time signal and button operation confirmation sound C 30 With each press in TIME/ CALENDAR mode, the hourly time signal and button operation confirmation sound are turned on and off alternately.
Cal. W671 MODE CHANGE ○ ○ ○ ○ ○ ○ ○ ○ ○ STOPWATCH mode Mode mark ○ ○ ▲ ○ ○ TIME/ CALENDAR mode ○ ▲ ○ ▲ ○ A With each press, ▲ the mode changes in order.
Cal. W671 TIME/CALENDAR MODE B Date Day TIME/CALENDAR SETTING C B Press for 2 to 3 seconds. C Select the digits to be adjusted. ▲ Month ▲ ▲ D ▲ D “A” (AM)/ “P” (PM) mark Set the flashing digits. B Return to TIME/CALENDAR mode.
Cal. W671 AUTO ILLUMINATION FUNCTION When AUTO ILLUMINATION FUNCTION is turned on: ● The display is illuminated with each press of a button to operate the watch. ● While the stopwatch or timer is counting, the display is illuminated every minute to signal the lapse of time: For the first 19 minutes in the stopwatch function and for the last 19 minutes in the timer function. B Press for 2 to 3 seconds. ▲ D Turn on/off the AUTO ILLUMINATION FUNCTION. ▲ B Return to TIME/CALENDAR mode.
Cal. W671 STOPWATCH MODE ● The stopwatch measures up to 10 hours in 1/100 second increments. B C Start / Stop / Restart D Reset / Measure lap time Current time Time measured Lap time measurement LAP Lap No.
Cal. W671 MEMORY RECALL FUNCTION ● The stored data can be recalled either during or after the measurement. B ▲ B D ▲ B D Press to activate the memory recall function.** With each press, stored data are recalled from the oldest to the newest. Return to STOPWATCH mode. **In memory recall after measurement, the oldest measurement in memory is displayed. In memory recall during measurement, the newest measurement in memory is displayed.
Cal. W671 TIMER MODE ● Two types of timer are available: preset timer and adjustable timer. ● The adjustable timer can be set up to 9 hours and 59 minutes in minute increments. Set time PRESET TIMER SETTING D B C Select the preset time. ➾ Selection of the preset time/ adjustable timer Adjustable ➾ 3 min. ➾ 5 min. timer 15 min. 10 min. ➾ No. of times the countdown is repeated D Select the adjustable timer. B Press for 2 to 3 seconds.
Cal. W671 ▲ ▲ C Select the digits to be adjusted (hour/minutes). D Set the flashing digits. ▲ B Return to TIMER mode. TIMER OPERATION B C Start / Stop / Restart D Reset * When the set time is up, a warning sound beeps for 5 seconds. To stop it manually, press any one of the buttons.
Cal. W671 ALARM MODE ALARM SETTING Current time B C ▲ Select the digits to be adjusted (hour/minutes). D Set the flashing digits. ▲ D ▲ C ▲ B Press for 2 to 3 seconds. B Return to ALARM mode. * The alarm is automatically engaged.
Cal. W671 Alarm engagement/disengagement C Alarm engaged With each press, the alarm is engaged and disengaged alternately. Alarm mark “on” mark Turning on/off of hourly time signal and button operation confirmation sound C With each press in TIME/ CALENDAR mode, the hourly time signal and button operation confirmation sound are turned on and off alternately.
Cal. W626 Cal. W671 ILLUMINATING LIGHT Turn on the illuminating light. The display panel is illuminated for 3 seconds.
Cal. W626 Cal. W671 NOTES ON USING THE WATCH MODE CHANGE ● When the confirmation sound is turned on, a beep sounds with each press of button A to change over the mode. It sounds in a different tone when the TIME/CALENDAR mode appears, so that you can easily know the mode shown. TIME/CALENDAR MODE ● The calendar automatically adjusts for odd and even months including February of leap years.
Cal. W626 Cal. W671 ● Note on unusual display: While setting the time/calendar, all the segments of the display will light up if both buttons C and D are pressed at the same time. This is not a malfunction. Press any one of the buttons to return to the TIME/CALENDAR mode, and then set the time/calendar again. STOPWATCH MODE ● Notes for Cal. W671: 1) Lap time measured and lap number remain displayed for 10 seconds, and then, the current time appears in the upper row of the display.
Cal. W626 Cal. W671 TIMER MODE ● After the set time is up, the timer counts down the set time repeatedly. After the timer is used, therefore, be sure to reset it as the battery energy is consumed enormously to shorten the battery life. ● In the adjustable timer setting, the flashing digits move quickly if button D is kept pressed. ● If the watch is left untouched with the digits flashing, it will automatically return to the TIMER mode in 2 to 3 minutes.
Cal. W626 Cal. W671 4) If the timer is left counting without being stopped, it will automatically be stopped and reset to show the set time when more than 12 hours passed and the time display reaches 0:00 a.m. or 0:00 p.m. ALARM MODE ● At the designated time the alarm rings for 20 seconds, and the display is illuminated as the alarm rings. To stop them manually, press any one of the buttons. ● In the alarm time setting, the flashing digits move quickly if button D is kept pressed.
Cal. W626 Cal. W671 BATTERY CHANGE 2 Years Battery life : Approx. 2 years Battery : SEIKO CR2025 ● The battery life may be less than 2 years if the stopwatch is used for more than 10 hours a day, the timer for more than 10 hours a day, the alarm more than once a day, the illuminating light more than 3 times a day, the confirmation sound more than 24 times a day and/or the auto illumination more than 30 times a week (only for Cal. W671).
Cal. W626 Cal. W671 appears, follow the procedure below to reset the IC. Press and hold buttons A, B, C and D at the same time for 2 to 3 seconds. The display shown at right appears. * Before using the watch, set the time/ calendar and alarm. Cal. W626 Cal. W671 “January 1st, Wednesday” is shown in CALENDAR display. WARNING ● Do not remove the battery from the watch. ● If it is necessary to take out the battery, keep it out of the reach of children.
Cal. W626 Cal. W671 TO PRESERVE THE QUALITY OF YOUR WATCH WATER RESISTANCE ● Non-water resistant • If the watch becomes wet, have it checked by an AUTHORIZED PULSAR DEALER or SERVICE CENTER. ● Water resistant 5/10/15/20 bar 5 bar WR 10/15/20 bar WR • Do not operate the buttons when the watch is wet or in water. If used in sea water, rinse the watch in fresh water and dry it completely.
Cal. W626 Cal. W671 * Pressure in bar is a test pressure and should not be considered as corresponding to actual diving depth since swimming movement tends to increase the pressure at a given depth. Care should also be taken on diving into water. ** We recommend that you wear a PULSAR Diver’s Watch for scuba diving. TEMPERATURES Your watch works +50°C with stable accuracy within a temperature -5°C range of 5° C and 35° C (41° F and 95° F).
Cal. W626 SHOCKS & VIBRATION Cal. W671 PERIODIC CHECK Light activities will not It is recommended that the affect your watch, but be watch be checked once 2 3 careful not to drop your every 2 to 3 years. Have Years watch or hit it against hard your watch checked by an surfaces, as this may AUTHORIZED PULSAR cause damage. DEALER or SERVICE CENTER to ensure that the case, buttons, gasket and crystal seal remain intact.
Cal. W626 Cal. W671 STATIC ELECTRICITY The IC (Integrated Circuit) used in your watch will be affected by static electricity which may disturb the display. Keep the watch away from close contact with objects such as TV screens which emit strong static electricity. 50 LIQUID CRYSTAL PANEL The normal life expectancy for the liquid crystal panel of the watch is approximately 5 years. 5 Years After that it may decrease in contrast, becoming difficult to read.
