Operation Manual

English

NOTES ON USING THE WATCH

TIME/CALENDAR MODE

[TIME/CALENDAR SETTING]

● The calendar automatically adjusts for odd and even months including February of leap

years from 1998 to 2047.

● Once the year, month and date have been set, the day of the week is automatically set.

● Setting the seconds:

• With the second digits flashing, press button C or E in accordance with a time signal.

The second digits are reset to “00”.

• When the seconds count any number from “30” to “59” and button C or E is pressed,

one minute is added and the seconds are reset to “00”.

● The flashing digits except the seconds, standard time/daylight saving time and 12-/24-

hour indication move quickly if button C or E is kept pressed.

● If the watch is left untouched with the digits flashing, it will automatically return to the

TIME/CALENDAR mode in 2 to 3 minutes.

● Note on unusual display:

While setting the time/calendar, all the segments of the display will light up if both

buttons C and D are pressed at the same time. This is not a malfunction. Press any one

of the buttons to return to the TIME/CALENDAR mode, and then set the time/calendar

again.

[ADJUSTING THE CONTRAST ON THE DISPLAY]

● The contrast on the liquid crystal display can be adjusted in 16 steps from level “0” to