Operation Manual

22
English
“15”. The contrast becomes higher as the digits indicating the contrast level increase
and becomes lower as they decrease.
● The contrast level has been initially set at “10” at the factory.
● When the contrast level is set to “0”, the digits on the display will be unable to read.
● With each press of buttons C and E, the contrast level increases and decreases by one,
respectively.
ALARM MODE
[ALARM TIME SETTING]
● The flashing digits move quickly if button C or E is kept pressed.
● If the watch is left untouched with the digits flashing, it will automatically return to the
ALARM mode in 2 to 3 minutes.
● When the time function is displayed in the 24-hour indication, the alarms are also
displayed in the 24-hour indication.
[ALARM ENGAGEMENT/DISENGAGEMENT]
● When any one of the alarms is engaged, the alarm mark is displayed.
● Alarm test: The alarm can be tested by keeping buttons C and D pressed in the TIME/
CALENDAR mode.
STOPWATCH MODE
● After 10 hours have been measured, the stopwatch continues measuring from “00”.
If it is left counting for more than 100 hours, it will automatically be stopped and reset
to “00”.
● Restart and stop of the stopwatch can be repeated by pressing button C.